tcanin00's latest activity

  • tcanin00
    tcanin00 reacted to DionR's post in the thread Magnum and Wiring Swap with
    Like
    .
    I think any Dakota/Durango should work. Maybe even a van or truck, but not sure. If you wanted to add the VTSS functionality, I think...
  • tcanin00
    tcanin00 replied to the thread Magnum and Wiring Swap.
    That explanation makes sense. Having an actual security system would be nice. I worry that someone is going to want my car more than I...
  • tcanin00
    tcanin00 reacted to DionR's post in the thread Magnum and Wiring Swap with
    Like
    .
    I think in order for it to work, it needs to see valid communication and then lose that communication. That's why power has to be on...
  • tcanin00
    tcanin00 replied to the thread Magnum and Wiring Swap.
    I could try that and see what happens. I would think if the circuit was open, it would acknowledge it as unable to communicate.
  • tcanin00
    tcanin00 reacted to DionR's post in the thread Magnum and Wiring Swap with
    Like
    .
    Shorting the network won't hurt the PCM. The network is a loop that goes high and low to created messages and shorting it just means...
  • tcanin00
    tcanin00 reacted to autopar3000's post in the thread Magnum and Wiring Swap with
    Like
    .
    Do you know what cam it is exactly? The stock tune will only tolerate so much duration / overlap before it starts to get confused...
  • tcanin00
    tcanin00 replied to the thread Magnum and Wiring Swap.
    Thank you so much for sharing this. I knew the 2nd Gen Dakota's had a much more complicated CAN/BUS network from reading...
  • tcanin00
    tcanin00 reacted to DionR's post in the thread Magnum and Wiring Swap with
    Like
    .
    I ran across a tip years ago and saved it. The gist of the tip is that if you turn on the vehicle and then short the CCD or PCI bus...
  • tcanin00
    tcanin00 reacted to DionR's post in the thread Magnum and Wiring Swap with
    Like
    .
    My understand is that the PCM P/N will not tell you anything. The PCM's all come capable of a no-start security setup, but it isn't...
  • tcanin00
    tcanin00 replied to the thread Magnum and Wiring Swap.
    I'll look up the part number again and see what else comes up for it. A Google search is what identified the PDC and PCM. It was in a...
  • tcanin00
    tcanin00 reacted to autopar3000's post in the thread Magnum and Wiring Swap with
    Like
    .
    +1 on 75slant6's comment. Watch out for Cherokees too, I think a lot of them had security. Maybe you could google the PCM part number...
  • tcanin00
    tcanin00 replied to the thread Magnum and Wiring Swap.
    I was hoping to use the 1999 Dakota harness and PCM I already have. Is there a way to see if my PCM has a security feature?
  • tcanin00
    tcanin00 reacted to 75slant6's post in the thread Magnum and Wiring Swap with
    Like
    .
    Use the pcm and harness from a Ram truck, those rarely/never had the security modules. Most Durango’s had them and quite a few Dakota’s...
  • tcanin00
    tcanin00 replied to the thread Magnum and Wiring Swap.
    Also, I read that OBD II uses a transponder key and theft deterrent system. One guy suggested that if you have the ignition switch and...
  • tcanin00
    tcanin00 replied to the thread Magnum and Wiring Swap.
    Yes, this was the article I read a while ago. Thanks for finding it. From my understanding, the Hughes intake is a licensed copy of the...
Back
Top