Recent content by Chebe

What’s one more a year later?? Need a suggestion for throttle cable, brackets and return spring if anyone can.

Please explain

Thank you, I’ve called and spoke with them and I’m leaning that route now. I really appreciate the heads up on the quality because that is important as well.

Mine is actually originally white (W1) believe it or not. Got the vin tag to prove. I can't seem to find out how rare she is but I'm refusing to make any drastic changes that would take away from it. I figure I can always go back to bone stock if needed this route. I have the original 318 but...

That’s basically what I was looking for without being able to say it. 3” seemed large. The Schumacher’s are still about $125 more than the TTI’s and on back order. I was trying to get it all together for Cruisin’ the Coast the first week of October

Yes or is one better than the other?

I've got a 69 Plymouth Mod Top Barracuda currently with 318 and 904 auto tranny. I bought the Tremec TKO500 tranny conversion from Silver Sports Transmissions and have decided to undergo the 408 Stroker conversion as well from BluePrint Engines (thanks to Johnny Mac) - 445HP/500TQ. TTI &...

The rear caliper is off a 79 el dorado, which is one of the worst calipers in existence. I had to sand 1/16" off each rear pad in order for the mechanical ratcheting mechanism to grab the next tooth to be close enough for the piston to push the pads into the rotor and for the brakes to work...

I have them on my 69 Barracuda right now. Do you have the 73-76 upper control arm, spindle and lower ball joint int he front? The rear requires the "green bearing" to install. I'll actually be pulling them off in the next week or so as I'm going with Wilwoods. I do not recommend them for the...

I purchased these Spindles from another FABO user last month for a Wilwood disc brake conversion on my 69 Barracuda. These spindles do not work the Wilwood kit I have. See below for details: Casting #3402738. Spindles have the same overall height with last three on casting being N118 & N124...

PM sent!!!! I'll say it for you, SOLD.

What is the correct water pump pulley for the small block with power steering and air? Im wondering if this BPE Water Pump Pulley - Bouchillon Performance Engineering would work still using the PS004 power steering brackets or converting to the PS007 '69 and earlier bracket with either the TRW...

Been thru this multiple times after replacing fried voltage regulators, alternators and batteries even after running a separate ground wire from voltage regulator frame to ground terminal and radiator support for additional ground points. I had a regulator fail in the fully closed position which...

This is likely going to be a head scratcher mixed with a why but here goes and I appreciate the help beforehand. I got a 69 barracuda with a '74 or '76 318 block (sorry I can't get under the car to check the stamp at the moment and can not remember nor find the picture). With that said she has...

Any dents on the housing? Also what's the condition of the pump (works, leaks, needs to be rebuilt)?