egonz's latest activity
-
Eegonz replied to the thread Engine dies when warm.It does come off the high idle ramp but doesn’t fully open. I’m going to bend the linkage a bit to get it open more
-
-
Eegonz replied to the thread Engine dies when warm.I think you’re on to something, rpm did not change whether it was ported or manifold vacuum. I ordered a timing light & am going to get...
-
Eegonz replied to the thread Engine dies when warm.Sorry about the late response, I tried adjusting the idle mixture screw and no difference. Accelerator pump is working on both carbs...
-
Eegonz replied to the thread Engine dies when warm.Sorry for the late response but I havnt been able to work on my car until today. I sprayed carb cleaner around the manifold and brake...
-
EI’m pulling the trans out of my Dart. 1970 318/904. Daily driver, 318 is near close to factory hp. I want a reliable transmission that...
-
Eegonz replied to the thread Engine dies when warm.Thanks for letting me know, I have the distributor hooked up to ported vacuum. But I will look around for a vacuum leak.
-
Eegonz replied to the thread Engine dies when warm.Sounds like a it’s worth a shot, thanks!
-
Eegonz replied to the thread Engine dies when warm.Yes it did. I adjusted the valves because one of the cylinders was missing, intake valve on #5 had no lash and was being held open
-
EHey guys newbie here trying to get my slant 6 going in my 73 duster. It turns on fine and idles beautifully. After it warms up and the...
-
EIm wondering if the lip on the cover is worn out because it don't bottom out lol it will go all the way thru if I keep going. Yea I used...
