DionR's latest activity
-
DionR replied to the thread Nv3500 vs ax15.@dartslantsix and @75slant6 are/were running an Ax15. Dartslantsix had his for sale several months ago. Either way, they should both... -
DionR replied to the thread Magnum Heads On 340.The problem is the bottom of the port. That line at the top of the gasket port is the bottom of the cylinder head. There isn't any...
-
-
DionR replied to the thread Magnum Heads On 340.SendCutSend can cut stuff for you. I have a pattern I gave someone here recently for this exact reason. Can't promise it is a perfect...
-
-
I don't blame you. Funny how some things get decided for you.
-
DionR replied to the thread Someone needs to start re-casting 340 blocks.Wikipedia says the Viper motor was LA based, so it must be true. Right? Viper engine - Wikipedia
-
DionR reacted to Kendog 170's post in the thread Someone needs to start re-casting 340 blocks with .Based on 360 I believe.
-
DionR replied to the thread Someone needs to start re-casting 340 blocks.I don't think there is a part that will swap, but the V10 is definitely SB based.
-
DionR replied to the thread 360 vs 383.To be clear, I'm not trying to change your mind or anything. Just didn't want anyone thinking that all 383's had real compression. I...
-
DionR replied to the thread 360 vs 383.Sure, but now the point about one having higher compression is mute since both would get whatever compression the builder decided.
-
Had a few hours on Saturday to knock some things out. I must have had a brain fart when I originally ordered all my AC parts. I always...
-
DionR replied to the thread 360 vs 383.Not all 383's had high compression, the 383 2bbl had pretty much the same compression ratio as the 360. Agreed that the 383 had a high...
-
DionR replied to the thread 360 vs 383.I got it. The '71 340 was the last year for the 2.02 heads, right? I bet when the 340 and 360 moved to a 1.88 head they picked up...
-
DionR replied to the thread '69 Barracuda T56 swap, floor, cross member.Looks great!
-
DionR replied to the thread Cold Case Radiator Hoses.@JBrian what radiator did you use? Kind of looks like my brothers Cold Case radiator.
-
DionR replied to the thread 360 vs 383.For me, I think the decision between a 360 or 383 is too project dependent to say which way I would go in a theoretical thread like...
