Recent content by kbduster

Anyone know how to reach him? I need one of his adapters STAT! Lol Any help would be appreciated. He posted a link to his website, but it doesn't work..Thanks

Thanks!

I can move it side to side with a little effort. Not really comfortable with that

What would I use to secure the cable to the pedal like original?

I have a magnum 408. I bought the AR engineering bracket for the throttle cable. Seems the bracket sits too far forward on the intake. To adjust and lock down the cable it's just about out the back of the holder. I have another cable and that distance from that collar that gets clamped down on...

Exactly what I was looking for! Thanks!. I will be running (2) 1/2 inch braided hoses, so I'm concerned with heat soak

Could someone please post some pics of your small block darts or dusters running the TTI step headers? I need to see how much room there is between the headers and the passenger frame rail where the stock fuel line runs. I'm installing a new fuel system while the engine and K frame are out and...

It's a '72

Previous owner had someone install new door glass. Windows don't close correctly. I went and bought a complete hardware kit for the whole door. I can't seem to find any factory diagram/schematics. I'd like to have them for reference because I don't know what I'll find once I get in there...

Looks like heads were shaved or the block decked.. intake manifold bolt holes wallowed out a bunch to get bolts to fit in the heads

I know, no worries!

Wow! All I was asking if anyone had opinions on a similar size cam....the wiped lobe was just an assumption from past experiences...Anyhow, I went with a comp magnum series .480/231°. Got all buttoned up and sounds the same. After a day of trying not to think about it, I dove back in and I found...

Wiped a couple lobes.. .

71 steel crank 340 with factory 10.5:1 pistons, later LA360 factory heads, air gap, 650 speed demon, tti's 2.5 w/Xpipe, 3k stall, 3.91's in my 72 duster. I bought the engine newly built and together. I was told it is a lunati .480 cam. That's all I kmow. Any recommendations for an off the shelf...