Search results for query: *

I'm looking for a black three spoke sport steering for a 69 Barracuda like shown in the picture. It doesn't necessarily have to have the horn cap/pad.

I'm looking for a non-ac rally dash bezel for a 1970 Dart/Duster. Cut for an aftermarket radio is O.K.

I'm looking for a black 73-up A-body bench seat with the fold down center armrest. In the southeast MI area would be great so no shipping would be necessary.

I have the following items to sell that I can bring to the Nats (must be paid for in advance) so you can avoid the shipping costs as I know it would be costly to ship due to their length. New grey trunk mat for 67-69 Darts. I didn't roll it all the way out for the pic but it is new in the box...

For sale is this red buddy seat including the floor brackets from a 74 Dart. Nice condition. $225 plus shipping. Postal money orders preferred as I don't have Paypal.

For sale is a 72 Demon hood with an NOS 73-74 style dual snorkel scoop. I bought this for my 70 Dart but I have decided to sell it as I could use the money for parts for my 69 Dart project. The hood was a base Demon hood with the holes for the scoop added as well as holes for hood pins. I had...

I put a big block with a 727 in my 69 Dart. I also installed a set of full length TTI headers. While neither of the trans. lines are touching the header tubes, there is only about 1/2" of gap at the closest spot. Do you think this will be an issue with heating the trans. fluid? I've done some...

I'm looking for a non-ac rally dash bezel for a 1970 Dart/Duster. Cut for an aftermarket radio is O.K.

I'm looking for a black 1971 front bench seat center passenger seat belt (both pieces) in good condition (no rust or fraying). The part number on the tags should be 3508257 I believe. Also, I need a rear center passenger male belt #3508258.

I'm looking for an original 383 A-body throttle cable in good condition.

I'm still looking for a big block 727 lower bell crank to transmission kickdown lever rod like shown in the picture. It needs to be the length shown and be the type that uses the snap on retaining clips on the ends. This particular one is from a set of 1967 GTX kickdown linkage.

I never noticed before but when going to reinstall the fender braces on my 69 Dart I found they aren't the same length. One is 12" long and the other is 11 1/2". I would assume they would normally be the same length so I will have to find one to match whichever one is the correct one. Can...

For sale: Never used Autometer Sport Comp II tachometer and gauges. Included are a 3690 tachometer with shift light and 3692 volt, 3637 water temp and 3627 oil pressure gauges. The gauges are all electrical gauges. I bought these for a car I used to own but sold the car before ever using them...

For sale is this red buddy seat including the floor brackets from a 74 Dart. Nice condition. $225 plus shipping. Money orders preferred as I don't have Paypal.

I have 2 finned aluminum 727 extra capacity trans. pans I don't need. Not sure what the additional capacity is but they are both about 2" deep. I have media blasted and painted them with engine paint, one cast iron color and the other cast aluminum. $125 each + shipping. No Paypal. Money orders...

This power brake set-up was on my 70 Dart when I got it 17 years ago. I prefer manual brakes so I replaced the power brakes with manual at that time. This set-up worked when I pulled it but has been sitting ever since so I don't know if the booster and master cylinder will need to be rebuilt or...

I believe this came out of a 70-72 Dart. What you see in the pic is what is included. $65 + postage. No Paypal.

For sale is a Mopar 2468372 big block bellhousing and inspection cover. I bought this bellhousing to put a 4-speed behind a big block in a Dart but decided to keep the car an automatic as it originally came. The bellhousing has been media blasted and I put a coat of primer on it. Inspection...

68-72 A-body steering center link. $65 + postage. No Paypal

New 12" oval finned aluminum 4 barrel air cleaner with filter. It measures 12" L x 8 1/4" W x 3" H and has a 5 1/8" carburetor opening. $55 + postage. No Paypal.

9 Chrome t-handle valve cover bolts. A little spot of rust here or there but still look good. $10 + postage. No Paypal.

For sale is a white 69 Dart Swinger stripe. It is Scotch 3M brand. Includes installation instructions. $50 + postage. No Paypal.

Two unused big block head pipe to exhaust manifold flanges. $15 for the pair. Unused/unopened big block exhaust manifold stud kit. Although the bag is unopened, I can see some surface rust on some of the pieces. $40 or $50 for both. Prices do not include postage. No Paypal.

1970/71 Year One big block spark plug wire separator bracket kit WR43. I bought this for my 70 GTX and sold the car before ever installing it. There is surface rust on a couple of them (from humidity while in the plastic bag), mostly on the one that mounts at the front of the intake. $50 +...

I'm looking for one window crank handle like shown in the pic. I'm not exactly sure what model year used this style but I think it may be 73-74 or possibly even later. I bought a set of four of these a few years back for my Dart and now that I have finally reached the point of installing my...

I found out today the repro sidemarker lenses I bought years ago for my 69 Dart don't fit. I guess they fit all the other cars just not Darts and station wagons. So, I'm looking for a new pair of lenses if anyone has a pair they don't need.

I'm putting the bucket seats back in my 69 Dart and have a question. I took the seats apart years ago to restore them and now that I have them back together I'm wondering if I may have installed the tracks on the opposite seats. With both seats all the way back, the passenger seat sits a little...

Looking for a big block 727 bellcrank to kickdown lever linkage rod like this or similar. Doesn't have to have the same bend in it as shown in the picture but the length needs to be the same as well as the ends where it attaches to the bellcrank and trans. lever.

1970/71 Year One big block spark plug wire separator bracket kit WR43. I bought this for my 70 GTX and sold the car before ever installing it. There is surface rust on a couple of them (from humidity while in the plastic bag), mostly on the one that mounts at the front of the intake. $50 +...

Two unused big block head pipe to exhaust manifold flanges. $15 for the pair. Unused/unopened big block exhaust manifold stud kit. Although the bag is unopened, I can see some surface rust on some of the pieces. $40 or $50 for both. Prices do not include postage. No Paypal.