Search results for query: *

pm sent

i have used his paint for a few engines i've done and so far so good , i bought the quart cans to spray mine. works out best for me. yes it is expansive ,but hopefully it holds up longer than rattle can paint.

HI, how many of you guys and gals have swap spaces at the mopars in the park show in stillwater ,mn ? have you had good luck selling stuff there? i decided to take some /a lot of things to the show this year, i'm cleaning out my sheds of parts, to make better use of the space,lol im bring...

Engine Enamel Online | High Temp Engine Paint | Hirsch Auto-hirschauto.com

try bill hirsch web site

link about ez grease bearings i don't think you should put 1 tube of grease in each wheel, i don't think the grease seal can stay in place and not leak grease onto the brakes, 9 times out of 10 its the outer bearing that fails from lack of grease ,my trailers have the EZ grease set up and i...

95 should have a 12 valve cummins 24 valve came out in late 98 or 99 trucks being a texas truck it would be rust free and worth doing a cab swap to get it back on the road, i guess at 76 years of age i probably wouldn't want to take on a cab swap either.

I would put a different cab on it and drive it not that hard to do a cab swap

well i did, but not anymore! thanks.:lol:

i would think so ,leave the valve covers off would help. does car have power steering?

problem solved!! did more testing, and found if i blocked #4 injector line off the truck would start right up, did this to all cylinders and tried starting after each injector was blocked, truck would not start until #4 was blocked off, ordered all new injectors,connecting tubes,and fuel lines...

no glow plugs cummins use a intake heater, which is new .

ok guys i did some more testing and found if i block off fuel lines to injectors individually when i get to number 4 injector the truck starts like it should.when its blocked off so im trying to decide on what injector kits to buy???? probably should replace all 6 injectors, but dang they are...

i have owned truck for 4 years and have put on 30k miles. i have not adjusted the valves

hi, i have not used ether to try and start it, yes i use the blended fuel and have not had any problems with jelling. this weekend i put a new heater grid in on saturday sunday morning it was 30 degrees ,truck was not plugged in and it cranked for20 seconds and started up, i was surprised!

185000 miles yes it has a k&n filter, its a 5.9 auto 4x4 3500 ram

hi, thanks for the reply, i had one prv on another engine that i swapped to mine and it did not change the no start, but i don't know if that prv was a known good part i swapped. ill check it out tomorrow,by cracking the line while cranking and see if i have fuel coming out. thanks

j body??

hi guys i have a problem with my 2004.5 325HP dodge ram Problem is when it is below 50 degrees outside this truck cranks and cranks sometimes it starts but most times it wont, i have a DRB3 scanner and have checked the following 1. no codes 2. fuel pressure from lift pump 23psi to 30psi while...

ok

pm sent

pm sent

why not loop the two transmission lines together at the rad with a hose and clamps , that way it bypasses the rad cooler and no fluid is lost.

btw i have pulled many different type of trailers and one thing most people don't pay attention to is the tire ratings for speed and weight,plus air pressure, i would look at the tires on your trailer they could be rated for 60mph max speed or something like that i have seen guys pulling...

2 wheel trailers always have wag, you could buy a weight distribution hitch with sway control and that would help, not that you need the weight leveling help, but the sway control would help with the wag.

hi, i have not been to this swap, what's the address and time the swap opens ? cost??

ill have to get to the box ,and look again to see what's there, i thought it was the tube that the air filter attached to at the radiator support that was missing,ill let you know.

ok i have one just missing tube for air cleaner.

are you looking for an original set up? mr. norms?

i've parted out many 68's and 69's so ill have to look for them later today after work,i honestly don't know what the difference would be between the years.