Recent content by Uhcoog1

I am still in need of a grille to bumper fill panel for a 70-72 Duster. Please let me know if you have one. Thank you, Wade

I need the grille filler panel to bumper. I’d also like to buy the rest of the grille support along with the hood latch. Please shoot me a PM. Thank you! Wade

WTB - 1970-1972 Plymouth Duster / Valiant hood. Need it shipped to Houston. Car is at bodyshop and they're ready for the hood. Please let me know what you have before I order fiberglass. Thank you

I'm looking for a 70-72 Duster / Valiant hood. Please post or shoot me a PM with what you have. Ready to buy. Thank you Wade NW Houston, TX

You are correct. I wrote this before mike released the gold box. EFI Source is arguably the best way to go if doing megasquirt and 3G hemi these days.

Chris- Mike has got it right- car is waiting its turn at paint. I spun three cam bearings on the duster in June of 2016, and I sent it to paint after that. I'll be in Austin this weekend with the viper racecar at COTA. Come out if you have time. Parade laps at lunch all three days I believe...

What all is included, Joe? In my experience, the market is right around $4,000 for a complete running 6.1, so I think you're priced correctly. But having no first hand knowledge of hearing it run is a concern. Do you have leak down numbers? And you could pull a couple bearings to inspect for a...

Glad you enjoyed the video! Ha- yes always fun chasing down 'faster' cars

Lancerman- I use megasquirt - MS3x. http://www.forabodiesonly.com/mopar/showthread.php?t=226125 You cannot go very big on a cam on a factory piston 5.7. 218/224 113+3 is about it. Maybe a tad more, not sure. You should start a thread with your specific questions - most people don't open...

I've run a bunch of different oils in the 3G Hemi. I run conventional for at least first 500 miles or so. Straight 30 wt. Then 20-50 amsoil for high temp open road racing. Also have run 5-20 in the past (factory spec for 5.7 if I remember correctly). I run synchromesh in my tko. I was thinking...

6 quart plan = 6 quarts total, plus a tad for filter, etc. So really 6.5ish when you account for the filter, and probably a bit more for oil in the system. I would recommend you fill 6 quarts from dry and mark the dipstick. When I did everything, I put in the dipstick with the pan off and...

What injector size? You can copy one of my tunes from the Megasquirt thread that is a sticky in this sub forum. That'll get you moving in the right direction. You'll need to input your engine size and injector size into the tuning program for the VE tables to calculate correctly, though. Ask...

The only thing holley does that megasquirt doesn't do is closed loop WOT (including nitrous). Some argue it's a bad idea. Others swear by it, as it saved their motors in quarter mile passes when a fuel pump started to fail (multiple were boosted). MS3x stays open loop for WOT, and has AFR safety...

Car timing cover and all accessories. Factory belt routing. You can leave out the AC compressor and just run a shorter belt (YMMV- I killed belts without it), but you cannot leave out the PS pulley (must run PS pulley or PS delete pulley- factory PS delete pulley from later hemi's won't work...

Thanks Brandon. Dish will be easy for most in the rear (if an A body rear). It is harder up front, as you'll need a decent amount of offset to tuck the wheels in the front fenders. There are some wheels that can still be had with dish and a decent offset, though. To date I've run...