T-56 Transmission Install Thread

I'd run out of master cylinder stroke if I do that. Right now I am using the complete stroke of the master cylinder and not getting enough slave travel to release the clutch. I just found the number I need for my pressure plate release, so I'm curious if anyone has measured throwout bearing travel with a single pedal press. I realize these throwouts have lots of travel (I've heard up to 1.5"), but I'm pretty sure you can't get that with a single press of the pedal due to master cylinder size. With the master I have (7/8" bore with 1" stroke), I might get 1/2"-3/4" of slave travel with a full stroke, but I'm not sure if that's what it's supposed to be or not. I need 0.3-0.4" of travel to release my clutch according to the manufacturer. The first half of my pedal is taking up the gap between the TOB and the PP fingers, the second half is pressing the fingers down, but just not quite enough to fully release the clutch.