T-56 Transmission Install Thread

Well, took it apart again yesterday and checked things out. Measured it up and it looks like the 1/2" spacer should be all I need. Have a little over 1/8" of compression left in the slave at fully collapsed height, so didn't put the extra spacer in. Bled it real good while it was out and checked my pressure plate fingers. As it turns out, it looks like one of them does sit lower than the others, so I think I might be in the market for a new clutch. I think that one finger being off is keeping the plate from fully releasing. Pedal feel is better after the bleed too, so I think that was compounding the issue.