2-Barrel to 4-Barrel Conversion

There are right and left hand clips available. I have found them at the hardware store or possibly Menards. The threaded throttle pin is actually supposed to go in the hole in the adapter that you have the kickdown hooked to. The throttle goes on the inside (short side of the pin) and the kickdown on the long side (outside) Remind me again what transmission you are running and what kickdown linkage pieces you are trying to retrofit.

View attachment 1716151985
Thanks Mike

It's a 1965 904

The linkage section that attaches to the carburetor has a fixed ball joint and threaded stud so I had to move the throttle pin up to the large hole with a bushing to clear the space.

Whatcha thinking?

20231007_143903~3.jpg

20231007_154655~2.jpg

20231009_195239.jpg