Gen lll hemi install in a 67 barracuda

You will also need a fuel pump 50psi. You will more than likely have to do some tunnel work. It’s been years since I did mine and there is a lot more stuff out there available. The biggest thing is figure your budget. Look at about $5-6k if you don’t have a trans. I have an 05 5.7 with the 545rfe. Alterkation suspension. So most of what I used may not work as far as headers. The oil filter will have to be remote.
A factory ECU is not hard to get from a junk yard. I’ve pulled several for members here. If you go with the bigger automatic trans or a manual you will have do tunnel work.
Drive shaft $200

Radiator- Dillan Radiator online, $140 inexpensive, mine has lasted 14 years in Texas heat.
Fan-ford Taurus-$179

Headers TTI $800
Fuel pump, regulator-in the tank or external. I bought a new tank with fuel pump in it. $800 $125 for regulator
Management system-Holley, Mopar, megasquirt, Hotwire $1200
These are the prices I paid in 2009
My motor and trans with 36k was $2500 just to give you an idea.

You should spend a long time doing research. If you change your mind on something it could cost you big time. Most here know because it happened.

Search facebook for parts. I lost about $3000 grand because I didn’t do the research. But then again there was only a hand full of us on here doing it in 2009.