1968 Dart sudden rear end noise.
Possibly looks like this but the pin wears out in the case.
Sometimes you have to pull the diff housing and ring gear, then remove the ring gear to get it out of the way so you can get the cross pin out for the spiders.
Another hillbilly trick is to grind off the one corner of the ring gear tooth so you can slide the pin out.
You may have just cracked off one or two teeth off the spider and or side gears. Putting the diff rebuild kit in could get you back on the road.
Have to take the rear cover off and see what is bad.
Take multiple pictures and put them up here on this post.
☆☆☆☆☆
Possibly looks like this but the pin wears out in the case.
Sometimes you have to pull the diff housing and ring gear, then remove the ring gear to get it out of the way so you can get the cross pin out for the spiders.
Another hillbilly trick is to grind off the one corner of the ring gear tooth so you can slide the pin out.
You may have just cracked off one or two teeth off the spider and or side gears. Putting the diff rebuild kit in could get you back on the road.
Have to take the rear cover off and see what is bad.
Take multiple pictures and put them up here on this post.
☆☆☆☆☆
