What sensors are needed to use the MSD 6Hemi controller with a 32t crank 6.1L ? I've been told I'd need two 5.7 sensors and then one from the 4.7

Here’s the instructions.

https://documents.holley.com/6013.p...8M*MTcxMzcxMzMzOS4xLjAuMTcxMzcxMzMzOS4wLjAuMA

Interesting that it say ‘05-‘07. The ‘08 5.7 and ‘08-‘10 6.1 should be the same, so no idea why they left those out. They reference the change in coil packs in ‘06, but those same coils are used from ‘06-‘23. The 6.1 map sensor covers ‘06-‘10. The crank sensor appears to cover ‘07-‘08, so that is probably fine. But the cam sensor applies to ‘06-‘07. Maybe the plug changed and they didn’t want to build a 3rd harness?

Best guess, buy the kit and see if it all plugs in and works with the stock sensors. Expect to change the cam sensor to an ‘07 but wait and see.