Search results for query: *

All loaded up and ready to roll for a slant 6 Race weekend - 1/8 mile at Knoxville Dragway TN. I know there is another large MoPar event at norwalk this weekend as well, but for the dwindiling Slant 6 world this will be the biggest event this year with Gill Welding giving out some prizes and...

Hello sages, is there a source for any 8.75 gear sets above 5.13:1? I am looking to try a ~ 5.88 or a ~6.1 I have a 5.57 now. It seems that all of those super low gear ratios are made for Dana rears. I wanted to find a new one instead of hunting swap meets..I just don't know if they are...

I have a 750 Performer/AFB on my setup now. I wanted to try and experiment with the 800 to see if there are any gains to be had with my combination. Is there any advantage to the AVS / AVS2 other than the Cheaper price tag? I have used the Performer series / AFB's for years with much success...

Like New Lokar BAG-6001 Pedal assembly - Firewall mount style. Compare to New Asking $125 and that includes shipping from 15642, PA to you. The pedal worked fine - no issues, it was just not my style. The sale includes the clevis at the top so you can put any Lokar or other factory-style...

Hello, One of the AL Blocks I bought did not have the Rear Main Seal Retainer top Section. I just need the special Top AL Rear Seal Retainer, not the bolts or anything, and the bottom is the same as an Iron Block so I am set there. Thanks!

Asking $50 OBO Plus Shipping from 15642, PA. 8# Box. Racequip 2024 Expired Belts. - Wrap Around / Bar mount for Shoulder belts. -Hybrid 2"/ 3" Shoulder belt width. 3" bolt in shoulder mounts included with galvanized / silver hardware - 3" Lap Belt bolt in mount - 2" Sub Belt bolt in mount (sub...

Choke Pull off, I am not sure what it is off of.. It works and holds a vacuum on the "straw test". Asking $10 + Shipping from 15642, PA

Speedometer Pinion gears $20 Each Plus Shipping from 15642, PA (1) Black 29T (2) Yellow 33T (2) Green 34T 8.75" Center block and Roll pin $10 Plus Shipping from 15642, PA

This exhaust elbow was on a Forklift. It has been blasted, painted, and ready for your project. It could be used with some sort of turbo project, the exhaust tubing is a slip fit over the end. It is cast iron and will bolt to the Bottom of a Stock Slant 6 Exhaust Manifold. Asking $15...

Here is a nice E brake Cable Equalizer. I am not sure what years this fits - '67-'76 if I had to guess, I had it as a spare for my '69 Dart. I no longer need it. It has been blasted and painted and ready for your project. Asking $20 Plus Shipping from 15642, PA to you.

Here is a nice, complete OE throttle pedal linkage for '60-'66 Mopars. Everything is free and moves properly for your 1 Barrel Slant 6 car. Includes OE Clips and requisite parts. Asking $20 OBO Plus Shipping from 15642, PA.

Hello, here is a nice Offenhauser Dual 1 Bbl Intake with (2) NOS never been used matching Carter BBS № 3278S carburetors. The throttle linkage is sorted and installed works and moves freely, and is adjustable from curb idle to WOT. A bracket for the transmission kickdown linkage is included. (I...

Hello, Here is a Set of ARP Con Rod Bolts for a slant 6. 2 Sets, - 1 New, Sealed in package, - 1 Opened , then resealed, Open box, has all proper parts, never used. Asking $50 each plus shipping from 15642, PA to you.

Used MagnaFlow 13219 3" In and out Reversible Offset / Center Stainless Muffler. Part is used, but I have cleaned it up in the blast cabinet. No internal or external rot. Pipe Ends are good and not crushed from crappy clamps. Loud muffler. Asking $55 plus Shipping from 15642, PA Sorry I...

Asking $350 Plus shipping from 15642 Can Also Bring to Carlisle this week. (7/12-7/13) Good, Clean, Running Carb, reset to factory Specs. - 51 Primary Jet. - 6.5"Hg Power Valve. Carb ran fine on a stock Slant 6 with no other mods. , I just went a different route for my project. Carb is...

Refurbished strut rods with 2 nuts and factory OE Washers. These likley came off of a '62 so no tension pins in the front of the large nut threads on the front of the parts. They have been sandblasted, refurbished, and painted semigloss black. They will fit all A Body cars from '62-'76, (not...

Like New Lokar BAG-6001 Pedal assembly - Firewall mount style. Compare to New Asking $150 and that includes shipping from 15642 to you as well. The pedal worked fine - no issues, it was just not my style. The sale includes the clevis at the top so you can put any Lokar or other factory-style...

Some, Maybe all current 2024 NHRA Pro Stock cars have a green light on or near the rear bumper area it's on and off during staging and launch. What is it for or what does it signify? Just curious. Thanks!

I have been documenting some of our cars that have seen better days.. I am not posting all of the picutes here on this thread, because I have a lot. Here is the linky to the album. Feel free to add your finds.

The new mad max furiosa features A '62 Valiant Signet, S series.

DC Stick / Tig Lift start / scratch start machine. I have used this machine to fab exhaust, in mild steel, stainless as well as 4130 roll cage tubing. It is not advanced, no foot pedal, steady amperage setting up to 130A. Works fine. Includes everything you need except for a gas regulator and...

Asking $125 plus shipping from 15642. Best offers accecpted. Plates work fine as far as I can tell. I bought new equipment and no longer need these.

Driveshafts for Sale $20 Each Plus shipping to you from 15642. No Trans yokes included even though there are some in the pictures, those are removed now. Lengths from 54 1/2" to 50 1/2" All are the "Small MoPar" 7260 2 1/8" U joint size on both ends. All of these shafts were from various A...

20240415_183917 by Hyperpack, on Flickr Hello All, in the above picture, I want to know what all of the silver marker means if anything. I know that the 90 1/4" is the Rollout / Circumference of the tire. But what about the 5 HZZ 2? and the 20/10? Any help is appreciated. I just want to...

I am not exactly sure what these are for. I know they are from an LA Engine and they are brackets for mounting front accessories. Possibly Alternator support or part of the RV2 / c171 Compressors? Cleaned and blasted ready for your project, Asking $20 OBO plus shipping from 15642 to you...

Good Local Show. Not much for a swap meet, but fun show. Link: https://pictures.dealer.com/j/junctionautosalescllc/75861f6a958c4efeab42776f4d695288.pdf

Sunday June 2, 2024. The L.E.T.S. Mopar show at Albion PA. Nice Local /Regional show and swap. I go most every year since maybe about 2000 or so!

Hello, Is there a readily availible magazine article from 1969 car life / road track / hot rod etc of a 1969 340 Dart with 0-60 or 1/4 mile times published? Looking for data from when the cars were new. Thank you.

Driveshafts for Sale $20 Each Plus shipping to you from 15642. No Trans yokes included even though there are some in the pictures, those are removed now. Lengths from 54 1/2" to 50 1/2" All are the "Small MoPar" 7260 2 1/8" U joint size on both ends. All of these shafts were from various...

Here is a cheap spool: A Welded open diff with berarings and races for the 8.75 / 8 3/4" Rear Asking $50 OBO Plus shipping from 15642, PA I have cleaned it up and every thing looks as it should for this type of part. The welds are all cracked from use, but it does not turn the spiders/ side...