Search results for query: *

Hi, Looking for a radio faceplete for my 60 Valiant. Thanks, Marion

All, I'm looking for a pair of 14" front wheels to mount on my 60 Valiant. Aftermarket wheels preferred or cop etc wheels. Narrow is ok. I know that 14x6" is common and the car has a 13" currently. I want a bit more rubber and even the stance. It has 15x8" 's and 275's in the rear. I was...

Hey, I need a set of lower control arms for a 1973 Dart. Looking for good condition units. Don't have to have sway bar tabs necessarily. Thanks, Marion

All, My 1973 Dart has a problem with blowing the #4 fuse. The car is basically a garage queen and has a very good wiring harness with all lighting previously in the car working. During a rare 300 mile round trip I discovered that I had no lights in the dash cluster or rear tails. Upon return...

All, I’m attempting to find a source to decode my serial number and data plate. I believe from what I was able to learn is that it was built on June 2nd 1960 maybe. I could not find a list for the Valiant maybe because of its bastard non affiliation for 1 year. Here is my plate cleaned up...

All, I have a nib Ignitor 1 ignition module for a Slant 6. Upgrade your spark! Needs a 3.0 ohm coil to operate. 80.00 shipped. Thanks, Marion

All, I have a good condition 1965 Slant 6 distributor with new points and condensor. Used an hour or 2. Drop in and go. 60.00 shipped Thanks, Marion

All, I have a like new Carter Street/Strip 120 GPH mechanical fuel pump. This was on my car a short while and maybe has a couple of hundred miles on it. 130.00 shipped. Thanks, Marion

All, I'm looking for a hard fuel line that I can use on my Slant. From the fuel pump and around the front valve cover preferably. Not over the valve cover if possible. I saw some images of a D-150 lines that looked promising. Let me know what you got. Thanks, Marion

All, I’m reinstalling a MSD 6AL2 in my “Valiant”. It came removed and stock dizzy was in use. I have it all ready except the 12 v Ignition for the Msd box and Pertronix II Mopar Dizzy. The diagram of the old ballast resistor as well as the stock wiring show a blue lead from the alt, and...

Hi Moper Fans. Is anyone currently and sucessfully running a Pert IGN II with a MSD SS coil? No other components. The primary resistance needs are very close .6 (P) to .35 (MSD). Throwing this into my /6 with a halifaxhops Mopar dizzy. Pertronix Tech would not say and MSD literature says...

All, I have a Slant 6 dual point distributor from mallory. 75.00 shipped. Thanks, Marion

All, I'm looking for a recommendation to set up a timing/vac adv on a Mopar dizzy for a perf slant six. I want to give the builder some good info. Street use on a light car (60 Valiant). No HVAC. But a open 8 3/4 in the back. 4 Speed w/ a 3.55 and 15x8's out back. Motor is a 232 cube /6...

All I have a vgc Holley 465 cfm 4 bbl. This came loose with my new Valiant /6. 250.00 shipped obo. Thanks, Marion

All, I have a Holley 500 cfm 2 bbl for sale. This came loose with my /6 Valiant. Passsing it on to someone with a / etc. 150.00 plus shipping. obo Thanks, Marion

All, I have a good condition /6 Offy 4 Barrel intake. Cast date of 10/15/01. 320.00 plus shipping I also have a Holley 2573-3 390 cfm 4bbl carb, a Holley 500 cfm 4412-3 1648 2 bbl carb /w adapter plate for this manifold for additional money. They will be listed seperately but will bundle...

All, Here are some recent photos my newly acquired 232 cu in. /6. Has a full engine build with all the goodies as prescribed by Clifford. Built by a race shop in Cali. Runs tight has 4 k miles and has seen some track time. I added a new vc with a pcv, and a KN air cleaner arrangement. Its...

All, I picked up a very cool new car to play with and have some fun. A 1960 Valiant with a 1962 225 (built). This appears to have been a purpose built 225/6 for drag racing. I has a 232 cu in motor built to Clifford specs by a race engine shop from Cali. Currently sporting a 600 Holley...

All, Does anyone have any discount sodes or coupons for Summit? Are they having a Black Friday Sale? I'm putting in a complete EFI fuel system and trying to get the cost down some ;). Thanks, Marion

All, I'm pretty serious on buying another Dart w/ a 416 Stroker street/strip engine 9.0 comp ratio, Solid Flat Tappet, W2 heads, Torker II, 1 7/8 header. I have been looking at the camshaft in this engine and have come up empty. Made 415 to the wheels on 91 octane. 113 mph in the qtr, stock...

All, I'l looking seriously at a 73 Duster that has 70 340 internals and heads in a 70 318 +.030 motor. It also has a 340 torker, some mild cam and headers. What exactly kind of brew is this and what is it's output potential? What kind of comp ratio are we talking and cubic inches? It has a...

All, Looking for a wiring harness for a 74 Duster, or a partial known good harness and can be pieced together. Helping a club memebr get his Mopar ready for the #nonames nationals being held in Missouri the 30th of Sept. He is a Youtuber covering his build. What is Dust or Bust? Background &...

All, Do I need a E85 compatible fuel pump? I have a Carter 80 lph on there now. I developed a leak on the fuel line inlet using a worm clamp. The hose end seemed kind of gnarled up. Before I go any farther, I wanted to see what you are using and if a standard pump will suffice. Thanks, Marion

All, I have a DANA 30 3.55 Ring and Pinion (Reverse Rotation Jeep Hi Pinion) for sale. Good Condition. 40.00 plus shipping from Amelia, Ohio 45102 Thanks, Marion

All, I have a pair of stock front caliper brackets for a 1973 Dodge Dart. Very good condition. 20.00 plus shipping from Amelia, Ohio 45102 Thanks, Marion

All, I have a like new pair of stock brake rotors from my 1973 Dodge Dart. Come with new grease seals and bearinfg races. 500 miles of use max. Brackets are not included in price. 45.00 plus shipping from Amelia, Ohio 45102. Thanks, Marion

All, I have a set of 10"x2.5" stock rear drum brakes for an A Body. With like new internals and shoes. Also with e brake cables. Bolt on and go! Removed from my Dodge Dart and went with a disc swap. 75.00 plus shipping from Amelia, Ohio 45102. Thanks, Marion

All, I have a nice rear package tray that was in my 73 Dart Swinger. It has speaker provisions. Fits 67-74 years. $25.00 plus shipping from Amelia, Ohio 45102 Thanks, Marion

All, I have a new "correct" set of A Body Cross Member Bolts. These sell for 30.00 plus tax and shipping from Brewers. $22.00 shipped from Amelia, Ohio 45102, USPS. Thanks, Marion Product ID: BP-TC71-4 BP-TC71-4 BOLT PACKAGE TRANSMISSION CROSSMEMBER 1971-76 A 1971-74 B/E BODIES Details...

All, I have a Windage Tray from my LA 360. Great shape. $25.00 plus shipping from Amelia, Ohio 45102