Search results for query: *

  • Users: MassDart
  • Content: Threads
  • Order by date
  1. MassDart

    [Found!] Needed. 8 3/4 axles.

    A pair of SBP A body 8 3/4 axles 27 11/16ths from splined end to outside edge of flange. Thanks! Doug
  2. MassDart

    [WANTED] 904 to 8 3/4 drive shaft

    Anyone got one that will fit a 67 Dodge Dart?
  3. MassDart

    U Joint / Yoke question

    Hi all, I'm going to be putting an 8 3/4 in my Dart. The center chunk was out of a '67 Coronet, and it's going onto a Dart that had a 7 1/4 with a 273 and an auto trans. Anyone know which u joint will work for this set up? Obviously going to need to shorten the driveshaft as well, but curious...
  4. MassDart

    Proper coil

    I'm going to be installing the 360 in my Dart this month. I am using the mopar electronic distributor with the orange box. I have the proper ballast resistor, but what ohm coil should I use with this set up? Any particular coils that you like better than others? I the Pertronix Flamethrower...
  5. MassDart

    Random AC question

    Okay. So I'm getting ready to put the Magnum I built for my 67 Dart with air conditioning. I have never done a motor on a car with air before, so I have a couple of questions. Is it safe to just disconnect the lines on the A/C ? Will it damage anything not having freon in the system while I'm...
  6. MassDart

    273 torque converter

    If I understand correctly, the 273 is an internally balanced engine. Am I correct to assume then, that the stock torque converter is unweighted? I ask because I'm going to be installing a 360 magnum into the car that has the weighted harmonic balancer and flex plate. Do I need to pull the...
  7. MassDart

    TQ opinions/question

    Here's my issue. I've built a 360 Magnum like the mild magnum build here on this site. I'll be starting the install of it in the next few weeks. My car is a 67 Dart with its original 904 with 18 spline and its original 273. Performance torque converters for this are either non existent or...
  8. MassDart

    [Found!] Parking brake struts for 10 x 1 3/4 drums

    Anybody got a pair of these laying around? The price for new ones is outrageous. Picture for reference
  9. MassDart

    Tach mounting

    I'm putting a tach on my 67 Dart. I'd like to put it on the column, but being a column shift car, the space is tight there. Anyone have any suggestions or pictures on where they mounted their tach? Thanks!
  10. MassDart

    [WANTED] backing plates and drums for 10 x 1 3/4

    Switching the rear end on my 67 Dart to an 8 3/4 and need a set of backing plates and drums for SBP. I'm running the factory steel 14" rims with the GT hubcaps. Open to other parts as long as they work with my axles sbp and steel rims. Thanks, Doug
  11. MassDart

    [WANTED] 904 Trans 68 or newer

    Anyone got a nice used one they're willing to get rid of?
  12. MassDart

    1967 904 Transmission spline

    My 67 Dart 270 has the original 904 transmission behind a 273. I'm trying to purchase a converter for my 360 magnum build. Is 67 the changeover year from 18 to 27 spline? Thanks, Doug
  13. MassDart

    Carb. Mechanical or vacuum secondaries?

    Trying to decide on what carb to use on my 5.9 Magnum build. I'm thinking 650cfm as it's not a strip car, but more a performance street. My question is, would you use a mechanical secondary set up, or vacuum? Car is 67 Dart. 3:23 suregrip, havent decided yet on the torque converter but thinking...
  14. MassDart

    Torque converter stall....

    Hi all, Now that the 360 Magnum I've been building is complete, I'm now thinking of the best torque converter to couple it with. My Dart has a 904 trans, 3:23 Sure grip, Engine is built with a Lunati cam with these specs: Retro-Fit Hydraulic Roller. Good high performance street cam with slight...
  15. MassDart

    Oil Pan gasket sealant

    What do you guys like for oil pan gasket sealant. Permatex black? The Right Stuff? etc, etc.
  16. MassDart

    Plugs

    My Magnum 360 build is complete. Just wondering what everyone uses for plugs for these. I have a fairly mild Lunati cam, 2.02 intake heads etc. Stock spec plugs good?
  17. MassDart

    [Found!] Mopar Magnum valve covers

    I know it's probably a long shot, as it seems these things are like hens teeth now a days, but does anyone have a set of these kicking around that they'd like to part with? Dart - Doug Ritchie] [/url] *Found. Thanks jdsduster!
  18. MassDart

    Speedometer Cable Removal

    I'd like to take my cable off and lube it as the speedometer needle bounces like crazy from 0-120 mph. Hoping that it actually is the cable. I crawled up underneath to remove it from the back of the instrument thinking it would just unscrew, I found that it has some kind of plastic clip...
  19. MassDart

    Water Pump

    As I'm getting near wrapping up my Magnum build for my 67 Dart, I need a water pump. My car has AC and I'd like to keep it. I also have the driver side inlet on the pump. I can't seem to find any water pump that says "with A/C". Failing finding one for an A/C car, can I use this one? It says...
  20. MassDart

    Plugs

    Whats everyone like for plugs in a carbed Magnum? Same RN12Y I use in my 273?
  21. MassDart

    [WANTED] Timing cover

    Anybody by chance have a small block timing cover with the timing marks on the passenger side?
  22. MassDart

    Balancer

    Can I use the stock 5.9 front balancer with my LA pulleys, or do I need to buy the aftermarket balancer for correct spacing? Thanks
  23. MassDart

    Intake Gaskets....

    Can I use LA360 intake manifold gaskets on a Magnum that I've put a intake and carb on? Thanks!
  24. MassDart

    [FOR SALE] 1967 Dart 270

    I'm thinking of selling my 67 Dart 270. This car was a Texas car (Denton) its whole life until a year ago when I brought it here to New England. The same family owned it for 50 years apparently. Odometer shows 38,000 and the title I received from the seller said 36,000 not 136,000 so I'm not...
  25. MassDart

    [WANTED] White arm rest pads

    Driver and passenger side front for 67 Dart
  26. MassDart

    Gauge wiring

    So I picked up a set of electrical gauges for my 67 Dart. Problem is, they came without a wiring diagram. I'm assuming the ground and 12v at the bottom of the gauge is switched power. What I'm not sure of is the B and T. This particular gauge is for water temp. The sender is a single...
  27. MassDart

    Magnum head gaskets

    Okay, so as I'm getting ready to put heads on my freshly machined magnum block (+.060, yes it was sonic checked and is good). I didn't realize it would be as challenging to find head gaskets (like everything else now a days). I'm replicating the mild street build of 67autocross. I have found a...
  28. MassDart

    Magnum heads

    As I'm wrapping up the short block build of my 5.9 Magnum that I'm going to drop into my 67 Dart, I'm getting ready to order heads. I'm looking to get EQ's with 2.02 intakes and have found 2 providers that are reasonably priced. One is Clearwater Cylinder Heads and the other is Performance...
  29. MassDart

    [Found!] Cam Thrust plate

    Looking for a cam thrust plate (and bolts) for my 360 magnum project if anyone has one hanging around. Drip tab too if available. Thanks, Doug
  30. MassDart

    Hood pad color

    Do any of you know if what the correct color for the hood sound deadener/pad is supposed to be? I see that they come in a gray and black. My car is a 67 Dart. Thanks!
Back
Top