Search results for query: *

  1. S

    EXACT LOCATION OF BARRACUDA HEADLIGHT GROUND WIRE

    Ok. So I'm done resfreshing most all the grounds up front on the Barracuda. And this afternoon I found the loose connector on my PT Cruiser resposible for my turn signal and side amrkers not working on the passenger side. Feeling frisky! So, NOW on to the real detective work looking for the...
  2. S

    No Headlights 2.0

    Have had no electrical problems for a year now with the 67 Barrcuda. When I had the dash apart to replace the dash bezels , I did attempt to put in a new headlight switch. **But, after several hours trying, I never could get the stem to come out. So, I just put the old switch back in. (It...
  3. S

    [FOR FREE] USED 67 BARRACUDA DOOR SILLS - Free

    I just put the new door sills on my Notchback. I really don't like hoarding old parts. So, I've got these old door sills in "FAIR" shape for anyone needing them for their day driver, resurrection, or roller. FREE! Just pay shipping from OKCity.
  4. S

    [WANTED] ISO: Disc Brake Master Cylinder for 1967 Barracuda

    Previous owner left the drum brake only MC on my 67 Barracuda that he converted to front disc brakes. So when I replaced the from discs with Willwoods, I get no difference in travel. NEED: MC part number 280 8600; casting number 222 5541 for disc brakes.
  5. S

    Master Cylinder - 67 Barracuda converted to front disc brakes

    1967 Baracuda was upgraded to front disc brakes by the previous owner. With all the "cobbling" that they did on the brakes, that we have fixed, do I have the correct Master Cylinder? I've now got 4 Piston Willwood caliper up front; but the pedal doesn't seem any better than it was with the MOPAR...
  6. S

    HELP NEEDED Identifying Brake Spindle - likely from a late 70s Volare

    This problem has been discussed on the forum in the A Body Thread; but it seems the brake parts are now crossing generations and MOPAR types. **But, I seem to have a disc brake spindle ID issue with my 67 Barracuda Notchback. To say that the previous owner "cobbled" together some things on my...
  7. S

    Belton Swap Meet, TX

    Anybody in TX going to the Belton swap meet? I need a Cooper Cobra GT Radial RWL 205/60 R14 if you see one in good shape.
  8. S

    Problems Identifying and Matching up new Brake Calipers

    ANYONE RECOGNIZE THIS SPINDLE??? The MOPAR brake parts that were on my front wheels - parts numbers were for a 1970-73 Duster. Large single piston caliper. **But, we've been through 2 separate Wilwood kits with that year matching, that neither fit! **Is this a drum brake spindle???? (Yes, we...
  9. S

    [WANTED] ISO: Someone with older Cooper Tire Collection

    Searching for a Cooper Cobra GT Radial 205/60 R14 that is out of production RWL
  10. S

    1967 Plymouth Barracuda - Fuel tank not vented properly??????

    Will the little problems PLEEEEEASE stop mounting up????? :rolleyes: I was about to comment that it hadn't gotten all that hot yet in Oklahoma....BUT...... TODAY IT HIT 100 degrees F! I went out into the garage after dinner, greeted by the strong smell of gasoline! First thought was my new...
  11. S

    [WANTED] WANTED: 205/60R14 Cooper Cobra Radial GT Tire

    Looking for this Cooper GT Radial with raised white letters to fit better in the front of my 67 Barracuda. I found one on eBay; and need one more. Please post, even if you see one at a flea market or Swap Meet!
  12. S

    HOW DIFFICULT IS IT TO REPLACE MY 67 BARRACUDA DOOR HANDLES

    I have ordered replacement door handles for my 67 Barracuda.; mine fairly pitted. I have done a lot of DIY work on it. But, I just want to get a reading on how much trouble I can get into replacing the door handles myself.
  13. S

    Rear Versus Front Tire Widths

    So, as I am narrowing down new wheels and tires for my 67 Barracuda, the thought occurs to me.... Although I am used to seeing all 4 tires the same width on passenger cars, that does not seem to be what I see on Classic cars. In order to get my wheels and tires back into the wheel wells, I...
  14. S

    Identifying my Current 15 Inch Wheels - and thoughts about wheel replacements

    Can someone identify my wheels from this picture? No markings. These are currently on my 67 Plymouth Barracuda; but I am unhappy with them. I'm sure the previous owner thought the bigger wheels/tires, and raked stance were "cool". But they present a dislike problem for me. #1 - the offset is...
  15. S

    MOPAR PLUS Replacement Dash Bezels

    ANYONE HAD ANY PROBLEMS WITH MOPAR PLUS INTERIOR REPLACEMENT PARTS???? I saved a few bucks othet places like Classic Industries by ordering my replacement dash bezel for the 67 Barracuda from MOPAR Plus. But, now, I'm not sure about the quality. Installing the new bezel cause a few scratches...
  16. S

    EMPTY TERMINAL BOTTOM OF 67 CUDA HEADLIGHT SWITCH

    So, I am about to finish reinstalling the new dash Bezel on my 1967 Plymouth Barracuda. I have become very aware that Chrysler engineers were probbaly paid to shorten every cable and wire that they could behind the dash in order to save money. THAT...is the only thing that makes the job...
  17. S

    Correct placement of 67 Barracuda instrument cluster wire.

    So, I am currently encountering the joys of replacing my instrument cluster bezel in my 67 Plymouth Barracuda. I've been very careful to label everything and followed a "How To" Sticky on the process. But, my middle name is "Murphy", after Murphy's Law. I bought a new Bezel for just under $700...
  18. S

    CORRECT CONNECTION FOR CHECKING LED POLARITY FOR 67 BARRACUDA INSTRUMENT CLUSTER

    Yup! I'm lazy, and not good at deciphering electrical diagrams. *But I am rehabbing the instrument cluster, gauge faces, and lights while I am installing a new Dash Bezel. Below is a picture of the back of my instrument cluster. TO BE SURE LED POLARITY IS CORRECT....WHERE WOULD I CONNECT THE...
  19. S

    SIZE OF 318 EDLEBROCK AIR FILTER

    So, I have posted pictures of my 67 Cuda with the 318 and Edelbrock 404 carb. I was ordering a new (colored) air filter, and ran into an unusual problem - THE WIDTH OF THE 4 INCH FILTER. Almost all the standard filters, and even Edelbraock ones, are 14 inches wide. That roughly measured what I...
  20. S

    [FOR SALE] New 16 inch Flex-A-Fan Blue

    Bought this 16 in Flex-A-Fan to solve a temp problem with my radiator. Only used for the drive from Kingfisher back to OKCity...45 miles. Was over $100 new from Summit Racing. $75 plus Shipping Oklahoma City OBO
  21. S

    [SOLD] A BODY FLIP GAS CAP - USED

    Replaced the flip gas cap that came with my car with a newer one. Mild to Mod pitting. Great for a day driver. No screws. Not into collecting parts myelf! $20 OBO plus cheap shipping. Oklahoma City
  22. S

    [SOLD] SOLD: Plymouth Barracuda 67 Taillight Assemblies - Used

    Used Barracuda taillight assemblies in good-fair condition (Left & Right set) Good enough for day drivers These were incorrectly placed on the rear of my 67, with also the incorrect trunk trim. So, I'm not sure of the year application. But the inserts are smaller than the 68 trim. See here...
  23. S

    [WANTED] Wanted: 67-68 Plymouth Barracuda Notchback

    LOVE MY '67 Notcback! But, I've got a local MOPAR buddy also looking for a 67-68 Barracuda Notchback, auto trans, maybe ac, and not a rust bucket. He's looking for something under $18,000, and within a days drive of Tulsa, OK. WHATCHA GOT?
  24. S

    [FOR SALE] 67 Barracuda Taillight Assemblies

    Used Barracuda taillight assemblies in good-fair condition (Left & Right set) Good enough for day drivers Mild to moderate pitting - pictures are from all sides of the trim. Right/passenger side is in good shape. Driver's side (closeup picture) has more pitting and very small chip at the bottom...
  25. S

    [SOLD] SOLD!: New 67-69 Barracuda Stainless Glove Box Trim -$40

    Brand spanking new - never used. Reproduction Glove Box Trim - coorrection! It is NOT Stainless; too light. Plastic with chrome paint. $40 plus shipping Oklahoma City
  26. S

    [FOR SALE] FOR SALE: 16 Inch Flex-A-Fan fits MOPAR

    A 16 inch blue flange Flex-A-Fan for MOPARS Like New - Barely used on 40 mile drive back from shop as temporary fix for a problem. Asking $75, as it was over $100 new from Summit Racing. Located in OKCity, but can ship. Shipping at buyer's cost
  27. S

    BAD MECHANICS - Thermostat and Radiator Fan Blade

    I know that somewhere along this saga with the new to me 1967 Barracuda I have questioned ya'll about the proper thermostat temp for a 318. The consensus was 180 - 190, so I had bought one to include in my latest list for my fav dealer. The old man and son who put this 318 together were clowns...
  28. S

    Replacing Instrument Cluster bulbs with LEDs - Illumination Detail Question - 67 Barracuda

    I am going to use gauge face overlaps in white when I replace the dash bezel; as well as upgrade to LEDs. I have used LEDs in the past to get better Illumunation. But, I have not disassembled the 67 Barracuda dash yet. The gauge face overlay folks I am considering say to simply use their...
  29. S

    AGED-FADED PAINT MATCHING ISSUES

    So, I've been trying to match up paint on my new to me 67 Barracuda. This car may have been repainted at some point. But, it is obvious that the DD1 paint has discolored some, and burnt out the metallic over the years. In all my Modern MOPARs, I have had excellent luck with...
  30. S

    ADDING SIDE MARKERS TO A '67 BARRACUDA - Locations and wiring

    I'm going to add side markers to my 67 Barracuda, for safety/visibility sake. I have looked at may Barracuda 67-69 pictures, and the rear side marker seems to be placed in several different locations. (Either even with the tip of the rear bumper; or, slightly above.) Is one or the other...
Back
Top