I ordered a 727 trans from Pro-Trans with clean neutral (PR123N) my current B&M pro stick shifter is(PRN123) what shifter will work with clean neutral pattern? Can I use my current shifter with a gate plate change? Thanks Matt
Has anyone used taller bump stop between bump stop pad and the upper A to prevent the front suspension from unloading (dropping down)on the launch? I have done some research on Hemi cars and on the launch the front wheels are still tucked up in the front wheel well. I have Qa1 front control arms...
Just wanted to upgrade. my cars been 9.69@138 with the old motor. I'm building a new motor with 300 hp more than this motor, just trying to update the car for more power. Thanks for everyone's reply. Matt
Trying to convert my 70 Dart 8 3/4 from 10" drum to rear disc brakes. My axle offset is 2.185", all the kits I have tried are (Wilwood 2.36 and 2.50) and the rotor hits the adapter mounting bolts and bracket. The axles are Moser with there MO400 bearing. Anyone ran into this issue? Thanks Matt
Looking for a 383 standard or .030 bore ok. Looking for block and main caps only! Can pick-up if close to Seattle or Oregon area. PM me here please! Thanks Matt
Just finished freshening up my 496 and notice I now have a lot of rocker noise/chatter. Had the same noise before but with a lot less chatter. Had a valve job and new springs but all the same valve train. My only issue was the heads were resurfaced ( just cleaned up) which made my push rods tips...
Hey Guys, I have a cam upgrade question! My engine is apart to inspect and is being freshened up. Sent the heads to Fastlane Machine to flow them, check max retainer to seal clearance and a valve job with blending the bowls. The heads flow 303.0 @ .700 intake and 228.9 @ .700 exhaust. Retainer...
Hey thanks! I'm working on the surge issue lowered the nitrous fuel psi. by 1/4 of a pound and it got better, added back one degree of timing still the same. Change both fuel systems filters, checked all of the Nitrous filters all are O.K. and gapped the NGK plugs to .025. This is on a 200 shot...
Ran a new best at Pacific Raceway last Friday. [email protected], 1.3460ft, [email protected] 660. Here is is a video my daughter and wife made from the track. Matt
Test and Tune at Pacific Raceways 2014 - YouTube
Ok Thanks for the info! I actually did research on trying to increase the flow out of these heads and found out you have experience with the stage VI. I have your number on my desk and was going to call you Monday. Your shop is highly recommended and has a very good reputation! I want to get...
I have stage VI heads on my 496 now that has all the updates and has been hand ported. No flow numbers. Has anybody opened their standard port heads to Max Wedge ports themselves? I have done a lot of porting and blending but never opened a port up that much. Would it be possible to open the...
On my 70 Dart I have been 1.40 60ft 9.92@134 [email protected] on 002/003 springs with housing floaters and ladder bars, car weighs 3400 pounds with me in it...Matt