Search results for query: *

  1. T

    Splash Shield Question

    1971 Dart used metal. Chrysler started using plastic after January of 1972.
  2. T

    Are 73 and 74 heat/ac controls the same?

    The vacuum circuit diagram on page 24-44 in the 1973 service manual is identical to the 1974 service manual. Both years have the same vacuum hose harness and the three vacuum actuators under the dash.
  3. T

    wiper harness

    Don't know how that's going to work on a 73 Duster. 3799024 motor fits 75-77 Fury, Coronet and Cordoba. They have different pivots, linkages and switch. Best to get complete 3 speed setup from 73 thru 76 Abodies.
  4. T

    trans id

    3640802 listed as 727 with long extension from Dodge pickup D100 - D200 or Motor Home with small block V-8. Date code is June 14, 1972.
  5. T

    Thermo-Quad metering rod measures

    Check out this Technical Service Bulletin. https://www.hamtramck-historical.com/images/TSBs/1973/14-02-73C.jpg
  6. T

    trans id

    Could it be 3640802?
  7. T

    Thermo-Quad metering rod measures

    Spotted something on eBay that may be of some interest. There are two Carter 9097 carbs listed for sale and one Carter 9097 listed under sold. None of these have that opening in the air horn.
  8. T

    Rear Spring Shackle.

    A/body and F/body have different part numbers. 3004822 - A/body shackle and bushing package 3780515 - F/body shackle and bushing package Both can be found on eBay.
  9. T

    Thermo-Quad metering rod measures

    From the Carter carburetor parts catalog: Carter 9097 Primary Jet 120-4099 - orifice size .099 Rod 75-2086 - dimensions are .069 x .061 x .040 There are many sources that show what came in the Carter 10-203 strip kits.
  10. T

    WHO'S GOT THE SCOOP ON RESIDUAL VALVES?

    Back in the 20th century Bendix and Wagner used the traditional expanders. Raybestos decided to change the design of their springs so the expanders were not necessary. Obviously either type will do the job. The technical bulletin simply states when and why Chrysler stopped using residual valves...
  11. T

    WHO'S GOT THE SCOOP ON RESIDUAL VALVES?

    https://www.hamtramck-historical.com/images/TSBs/1974/05-05-74D.jpg
  12. T

    What model 2 barrel Carter is on a 72 Dart with a 318 ?

    Most 1972 Abodies with automatic trans and Non - California equipped cars used Carter 6150s.
  13. T

    What model 2 barrel Carter is on a 72 Dart with a 318 ?

    Manual or automatic transmission?
  14. T

    WHO'S GOT THE SCOOP ON RESIDUAL VALVES?

    In the late sixties and early seventies Brake companies began using metal expanders on each end of the springs. The expanders pushed the rubber cups tightly to the wheel cylinder bore which made residual valves useless. It took a few years before, the residual valves were completely...
  15. T

    1973 Duster Column shift linkage

    Column shift and floor shift lower rods are different. Lower rod you purchased is for a floor shift.
  16. T

    Steering column drop

    1974- 1976 is slightly different. First disconnect the battery. Much easier if you remove steering wheel. Remove speedometer cable. Later models only have two studs and nuts holding column to dash. Then remove 3 bolts at floor pan. Let column rest on seat. Remove phillip screws holding cluster...
  17. T

    1973 Duster Column shift linkage

    Title states column shift, is that correct. 904 or 727 transmission?
  18. T

    1966 Plymouth Valiant Shift Linkage Help

    https://www.ebay.com/itm/394623697478?_skw=1553305&itmmeta=01J8NQKSZ86YQT5DES9C5XMMB6&hash=item5be167c246:g:~mkAAOSwkMlkYCOK&itmprp=enc%3AAQAJAAAA4HoV3kP08IDx%2BKZ9MfhVJKnCWo5je6ly1Y3eDDkqBIWL3IJUQNttQtS%2FGnW1W47YppkvwK3sfQrRNEmOJu9kEbnXyhglr7pDWC8hLk00NumDr%2BcVj2cDJ61gC3W10ycdkxS3jdntka%2B7iSA...
  19. T

    904 Identification

    Looks like the stamped number missed the first digit. Should be 4028815. Date code 5902 would be September, 24 1977 which would be a early 1978 model. Originally was used in 1978 Fury, Monaco, Volare, Aspen or Diplomat with 360 engine, 2 barrel carburetor with lockup 904 transmission.
  20. T

    Key issues with my newly acquired 69 Barracuda

    Take the switch assembly and bang it against a piece of wood while pulling and pushing the key back and forth. If that does not work then grind the release pin and remove the lock cylinder from the switch. Dremel has many different grinding tips.
  21. T

    What is the correct left defroster duct size for a non a/c 1974 Duster?

    https://www.detroitmuscletechnologies.com/mopar-a-body-67-76-dash-defrost-vent-hoses-26-21-2-50-dv2h/
  22. T

    64 valiant carburetor

    1964 factory service manual and Chrysler parts catalog both show Holley 1920 and Carter BBS used on 225's that year.
  23. T

    Slant 6 Exhaust Clamp.

    There are some on eBay. Search for : 2823456
  24. T

    [WANTED] Master cylinder rebuild kit

    While you can never guarantee a new or nos part is good right out of the box, personally have not had a problem with new old stock Chrysler master cylinder rebuild kits. Has anyone tried this product when rebuilding hydraulic parts. https://www.rockauto.com/en/moreinfo.php?pk=12976641
  25. T

    [WANTED] Master cylinder rebuild kit

    MK 697 has been discontinued for many years. Why not use the original Chrysler rebuild kit : 3744423. Here's one on eBay...
  26. T

    [WANTED] Master cylinder rebuild kit

    Power or manual brakes?
  27. T

    Hard to find 10” drum brake springs

    Gibson 2101-2 shows will fit 65-68 Plymouth Barracuda and Valiant with 10 inch brakes...
  28. T

    Ball joint socket size and where to purchase?

    This explanation of ball joint socket sizes may help. Back in the 20th century, there were 3 socket sizes for 3 different ball joints. Let's refer to them as small, medium and large. We can also use Moog part numbers to distinguish which socket fits each ball joint. The information provided in...
  29. T

    [WANTED] 7 blade fan mopar # 3870107

    3870107 was found on 75 - 81 slant six engines with maximum cooling.
Back
Top