[FOR SALE] 73 340

-
Status
Not open for further replies.

gliderider06

FABO Gold Member
FABO Gold Member
Joined
Oct 21, 2011
Messages
2,469
Reaction score
1,679
Location
Delaware
Rating - 100%
47   0   0
Contact seller
Hi all! Doing some cleaning and trying to raise funds for the Duster project.
I have a 73 std bore/crank 340. It has a groove in #5 cylinder from the wristpin, that will need a sleeve to repair it. Other cylinders should only need a max .020" overbore. #'s on the block are 6-20-73 cast#2780930-340-5 and a vin # of 3B583260 or last two digits G9 hard to tell.
Asking $450.00
Also have a set of 915, 2.02 J heads for the motor asking $300.00/pair.
Also I have a machine shop fresh .010/.010 cast crank for it. Asking $125.00 for the crank.
I can not ship any of these, too heavy and would be super expensive to ship.
Would be willing to do a package deal for all the parts together, or sell seperately.
Located in Milford, Delaware.19963
20190101_142134.jpg
20190101_142155.jpg
20190101_142221.jpg
20190101_142242.jpg
20190101_142638.jpg
20190101_142736.jpg
20190101_142801.jpg
 
Last edited:
Absolutely! Package deal or seperate. I just can't ship the parts.
Thanks Paul
 
I shipped some cast iron heads and didn't use a box. I just found big pieces of cardboard, like refrigerator box or furniture boxes. I rolled the heads up individually in the cardboard and folded the ends over and taped it all up. I think it was around $100 for both to be sent.
 
Depending on where they need to ship, I think it could cost nearly as much as the heads. Finding boxes and packing may be a bit tricky as well.
Have the heads been checked at all? Also my area codewoul be 95037 ca
 
Ups shipping estimator has $105.00 each head to California. I figured it would be expensive especially the weight and distance involved.
I have never had the heads apart. Just sitting on my shelf the past 5 years.
Thanks!
 
Status
Not open for further replies.
-
Back
Top