[FOR SALE] Custom A Body Bronze Brake and Clutch Bushings

-
Status
Not open for further replies.

ValiantOne

Well-Known Member
Joined
Mar 20, 2008
Messages
1,117
Reaction score
210
Location
West "By God" Virginia
Rating - 100%
28   0   0
Contact seller
Hey All.

I finally got back around to turning out more of the Custom Bronze Brake and Clutch Bushings I've been selling here for a few years now.

Currently I have:
-Standard A body brake bushing (fits auto and 4sp both, 1963-76) If your brake pivot shaft is .810 in diameter, this is the bushing you need
-Standard A body clutch bushing (fits 1963-76)

If anyone is in need of the Heavy Duty set up (brake pivot shaf dia .997) let me know. If we get a few orders together I'll make a batch.

The prices are $30 per set for the brake bushings (2 pieces) and $25 per set for the clutch bushings (2 pieces), or if you need both brake and clutch it is $55 (4 pieces) + shipping and any Paypal fees.

I just finished a batch of each and they are ready to ship. Two vids (how they fit & making them) and picture below

Thanks,

Chris E., Valiantone
Williamsport, MD





brake bushing pic.jpg
 
Last edited:
These are the best!!!! I definitely recommend 100% I used these on a 4 speed setup, and they fit absolutely perfectly. Well worth the price.

20160604_151654.jpeg
 
Tried to PM but got an error. I would like a set for the heavy duty clutch/brake pedal.


Cool, I'll put you down for a set. If we can get two others, I'll run a batch. I already have the material. Just have to order and cut a mandrel of the right size. These things dirty up the ENTIRE shop, so running them in batches is necessary.

Dunno why my PM isn't workign......hmmm
 
Looks like exactly what I need, but the Contact Seller button throws an inbox full error. I definitely need a set of clutch bushings for a '67 Barracuda 383 4 speed. I'm thinking I'd do the brake pedal too as long as I have it apart. Please set me up to order a full set if you still have them available. Thanks
 
Looks like exactly what I need, but the Contact Seller button throws an inbox full error. I definitely need a set of clutch bushings for a '67 Barracuda 383 4 speed. I'm thinking I'd do the brake pedal too as long as I have it apart. Please set me up to order a full set if you still have them available. Thanks


Sorry! I'll clean up my inbox and send you a note today. Thanks.
 
A original 340 car would likely be the 1" HD bushing. I'm making those this week.

Best,

CE


Would the HD bushing fit in a ‘67 cuda with the 273 Commando engine and an automatic tranny? Couldn’t it serve as an upgrade in comparison to the regular-sized bushing?
 
With the auto trans I'm nearly certain they just used the standard brake bushing. I do have those in stock.

In stock? Great! How much and where do I send you the payment? Preferably PayPal.

By the way, I tried to PM you but your inbox is full.
 
Chris
I’ll take two sets. One for the clutch pedal and one for the brake pedal. My shipping Carl Kropp 360 Wilson St Fairfield CT 06825. Just pm me the cost with shipping and where to send the PayPal. Thanks
 
***Update***

for all you guys who are waiting for the HD .997 ID bushings. I finished a batch yesterday. I sent a pair to Jamie at Passon Performance and he is going to test them on a factory HD pedal set up. I was working from blueprints and just want to make sure they fit properly before I start sending them out. I should hear back from him sometime this coming week.

Thanks for your patience!

Best,

Chris E.
 
Just bought another set of these - this time for my 66 Dart. What a great product! The fit was perfect once I polished a tiny burr off the old pivot pin. I ended up installing a grease fitting too, for good measure. Thanks Chris!

upload_2020-8-23_16-7-35.png


upload_2020-8-23_16-8-32.png


upload_2020-8-23_16-8-50.png


upload_2020-8-23_16-9-1.png
 
Status
Not open for further replies.
-
Back
Top