5.5psi flowing through a .073 jet. Do it at the track before you make your 1st pass. Bottle pressure @ 950-975 purge it down but don't go below 900. 950 typically works best and good for solenoids. Make sure you have colder plugs pull enough timing. Personally start with single stage 150hp and...
Actually I would plan on dropping et with the improved 60' there is a difference in hooking and hooking hard. A car can leave fine, but you want to launch
Keep working on it. Money would be better spent on shocks. Calvert 90/10 and there single adj. Rears and the 002/003 springs. I've done 1.8 60' at 12.9 1.59 with a 12.01 and 1.34 @ 10.36 with only SS springs and shocks. Work the entire car guys. Make everything loose then tighten up the rear...
I have a ram 1503 sfi billet 28lb flywheel only ran two seasons with one clutch, resurfaced only took .005 to make perfect! small block internally balanced (318-340)
$175 in Janesville,WI can email/text pictures
have a set of decent black 74' duster bucket seats with tracks would need covers and probably some foam work, great rebuilders!
$325 pickup only around Janesville,wi cant email/text pictures
nos 1/4 panel for 70-71 dart has surface rust pretty straight some lite rust pitting $250/offer local pickup
vfn fiberglass lift-off 6 pack hood for 70-72 dart nice shiny b5 blue paint
$300
70-71 fiberglass dart fenders U.S. body source nice epoxy primer on them pretty straight
$325...
I have a clean mag checked and pressure tested 69 340 block with 1 sleeve installed will be clean and useable at .030 over bore with main caps and bolts. local pickup only in/around Janesville,wi $500 can email/text pictures
I have a pretty nice 68 barracuda dash for sale pretty nice shape dash pads are nice plastic is nice except chrome is flaking off in spots. Has 120mph speedo glove box door am radio (don't know if it works) heater control ash tray black in color $500
68 cuda steering column from a 4 speed...
It is all original nice shape, black cover trim is decent, carpet on back is faded but seemingly nice foam and cover would clean up respectable
$225 obo
p.m. email for pictures and contact info
a pair of 1974 duster black bucket seats driver needs cover and foam pass. is in okay shape but I imagine you would still want to redo it nice seat tracks
$300 obo
p.m. for pictures and contact info
I have an nos full quarter panel for a 70-71 dodge dart. It has surface rust and a few small pin holes around the marker light area and is mostly straight, has small slightly pushed in area by door jam, not a hard dent however and could potentially push back out with ease
$400 obo
p.m...