67_Slimer's latest activity

  • 67_Slimer
    67_Slimer reacted to 340Dart's post in the thread Dana 60 fluid check with
    Like
    .
    Dr. Diff recommends 85W 140 conventional oil with Motorcraft fiction modifier. This is what I used in my Dana 60. I used Lucas oil which...
  • 67_Slimer
    67_Slimer reacted to Ricks70Duster340's post in the thread Dana 60 fluid check with
    Like
    .
    When I bought my Dana 60 from Strange, they said to use 85W-140 so I bought bottles of Castrol. My unit only takes 2 quarts while I...
  • 67_Slimer
    67_Slimer posted the thread Dana 60 fluid check in Transmission and Drivetrain Tech.
    I'm ready to change my Dana 60 cover and fluid. The car is street driven but I'm not shy with it. It has 4.56 gears and Master Line...
    • Screenshot_20240426_131356_Chrome.jpg
  • 67_Slimer
    67_Slimer reacted to CRUZE 418's post in the thread 23 or 18 spline? with
    Like
    .
    Well, I am still waiting to break something with the junk clutch, have'm in two cars, one is a Hemi car, the other is a small block...
  • 67_Slimer
    67_Slimer reacted to perfacar's post in the thread 23 or 18 spline? with
    Like
    .
    the third gear is the weakest gear, in a four speed trans, i knew a racer did his burnouts in 3 rd gear, kept breaking 3rd gear. we used...
  • 67_Slimer
    67_Slimer replied to the thread 23 or 18 spline?.
    Woah woah , 2 fat friends , I'm the 3rd :rofl:
  • 67_Slimer
    67_Slimer reacted to Inertia's post in the thread 23 or 18 spline? with
    Like
    .
    With the small front bearing and a worn trans, - 3rd gear deflection where the shafts meet, loose clearances, 3 fat friends, it adds up.
  • 67_Slimer
    67_Slimer reacted to Newbomb Turk's post in the thread 23 or 18 spline? with
    Like
    .
    I thought I posted it but if you can find a B&B/Long cover I’d get that. I’d use an organic disc without a Marcel spring and set the...
  • 67_Slimer
    67_Slimer replied to the thread 23 or 18 spline?.
    So What clutch/PP do you recommend I purchase for my setup? I like to have fun with the car but don't want to break stuff anymore. I...
  • 67_Slimer
    67_Slimer reacted to Newbomb Turk's post in the thread 23 or 18 spline? with
    Like
    .
    So that clutch junked your gear box and that’s not junk? Those paddle discs should never ever be used in a street or drag car. You...
  • 67_Slimer
    67_Slimer replied to the thread 23 or 18 spline?.
    You can call it junk but I will call it Too Aggressive. I ran 11.80s with it , not to mention it grabs like that and its 25 years old so...
  • 67_Slimer
    67_Slimer replied to the thread 23 or 18 spline?.
    Found a picture of the damage to my 3rd gear.
    • 20240421_183402.jpg
  • 67_Slimer
    67_Slimer reacted to Jeremiah (jd)'s post in the thread 23 or 18 spline? with
    Like
    .
    I would do an 18 spline unit for several reasons. The gears are of a coarser pitch and 2-3-4 speed gears are bushed. The input shaft...
  • 67_Slimer
    67_Slimer reacted to perfacar's post in the thread 23 or 18 spline? with
    Like
    .
    you can run the B&B/long clutch from mcloed, at 1800 base with a rag disc will work very well. friend had a1600 base one in his 360, ran...
  • 67_Slimer
    67_Slimer reacted to Newbomb Turk's post in the thread 23 or 18 spline? with
    Like
    .
    That clutch will break an 18 spline box too. You can’t build a gear box, ANY gear box that steaming pile of parts breaking junk ****...
Show older items
Back
Top