67_Slimer's latest activity

  • 67_Slimer
    67_Slimer replied to the thread Intake upgrade?.
    I'm building a standard stroke 340 , maybe 3500 - 7000 rpm. 11.5/1 solid roller , should I just keep my regular victor?
  • 67_Slimer
    67_Slimer reacted to Demonracer's post in the thread Intake upgrade? with
    Like
    .
    The Super Victor was produced for higher RPM race motors, in my opinion. Stroker motors like big plenums at higher RPM. I don't think...
  • 67_Slimer
    67_Slimer reacted to Mims Gt's post in the thread Intake upgrade? with
    Like
    .
    Depends on RPM you are trying to see the diff. you will need to be 6k rpm for the Victors to do their thing..or the giggle juice (NO2)...
  • 67_Slimer
    67_Slimer reacted to B3422w5's post in the thread Intake upgrade? with
    Like
    .
    Stock stroke I would stick with an air gap, or if an aggressive combo, a Victor. Super Victor has a huge plenum, and to me it’s...
  • 67_Slimer
    So I have a 340 , .030 over , 10.5/1 , .525 solid flat Cam , eddy heads with 1.6 RRs , Victor intake , 750 Brawler , 4 speed and 4.56s...
  • 67_Slimer
    67_Slimer replied to the thread Gear choice decisions.
    So , do they handle the same abuse as the 4 speed? Same exact dimensions?
  • 67_Slimer
    67_Slimer reacted to AJ/FormS's post in the thread Gear choice decisions with
    Like
    .
    30s on a 67 dart on the street? Are we building a Hot Wheels Gasser-replica? Have you thought that through? I get your math but; Here's...
  • 67_Slimer
    67_Slimer reacted to RustyRatRod's post in the thread Gear choice decisions with
    Like
    .
    I would leave the 4.56s and go with an A833 OD transmission. BOLT IN swap. There will be those that will argue the ratios suck in the...
  • 67_Slimer
    67_Slimer reacted to junkyardhero's post in the thread Gear choice decisions with
    Like
    .
    with out writing a maifesto, ejnoy: https://spicerparts.com/calculators/transmission-ratio-rpm-calculator to more completely answer...
  • 67_Slimer
    67_Slimer reacted to 33IMP's post in the thread Gear choice decisions with
    Like
    .
    You could move the rearend back a bit (either spacers in front of the hangers, or redrilled super stock hangers. That should let you run...
  • 67_Slimer
    67_Slimer reacted to AJ/FormS's post in the thread Gear choice decisions with
    Like
    .
    If 28s fit, that is an increase of 3.57%, which is a similar loss of cruise rpm. My math says 50mph=2839rpm, with 4.56s and 27s. thus...
  • 67_Slimer
    67_Slimer replied to the thread Gear choice decisions.
    Thank you for the input and research , seriously thats awesome and means a lot to me but I occasionally drag race the car and want the 4...
  • 67_Slimer
    67_Slimer replied to the thread Gear choice decisions.
    Thanks!! just did that. it will save me about 350 RPM
  • 67_Slimer
    67_Slimer reacted to 4mulas's post in the thread Gear choice decisions with
    Like
    .
    Google rpm calculator, there are many, and enter your parameters for any scenario you want..
  • 67_Slimer
    So I have a 340/4 speed/dana setup in my 67 dart. Street/strip car but now its pretty much a street car. Even though it's not raced...
Back
Top