Recent content by 67Dart440

Still available...

ttt

bump

Sorry for the delay... here is the info on the block. Car is not at my house at the moment but did find this picture. Looks like a 72 best I can tell.

Still available... willing to entertain reasonable offers.

bump

(2) Weld Draglite 15x15 - 4.5" BS wheels with Hoosier 32x13.5x15 slicks and pair of M/T Sportsman 33x19.5x15 DOT tires. Slicks are very old and may not be usable. M/T tires are 6 years old but only have about 750 miles on them. Two sets of inner tubes included. All have been kept indoors. $250...

Mopar 440 .030 over, steel crank .010/.010, stock rods, Ross domed pistons, MP 296/557 mechanical cam, 452 castings w/ 2.14/1.81 valves and mild porting, MP 1.5 aluminum roller rockers, ARP Main and Heads studs, and ARP fasteners, MP M1 intake, Holley 830 DP, Milodon 7 qt pan w/ windage tray and...

Sold!

For Sale - 1 set of Hooker Ceramic Coated Fenderwell Headers (2" primary) and 3.5" mandrel bent aluminized side exit exhaust with Dynomax Bullet Mufflers. Had these installed on my car for 9 months before trans went out and car went through major overhaul. After installation of motor on...

I have a number of reasons for wanting to stick with the fenderwell headers. They are just what I prefer and happen to be a better choice for my particular setup.

The tires in the pictures are M/T Sportsman 26x7.5x15 on 4" Weld Wheels. I have the Alterktion front suspension with BB motor mounts and manual rack and pinion. Very impressed with the Hedmans... just wish they had a little more clearance near the valve covers, but other than that, can not complain.

So I decided to order and try a set of Hedman Fenderwells figuring worst that would happen is I would have to send them back and best case I would save at least $1500 as compared to a custom set. They were on back order and took a month to arrive, but they fit great! A little more difficult to...

Thanks... that was actually one of the few things I was able to find but did not really answer my questions with regard to tire clearance issues. The fabricator that did my cage came by tonight and said it would be just about the same labor to start from scratch as it would be to modify the...

Not sure if that was directed to me or Ori, but if to me you can see them in my sig picture. Drivers side is worse than passenger side because of the collector angle.