Cleveland Performance sells used setups. They come on a pallet so can put a battery and oil in the engine and start it up. They have all the accessories on them too. Some stuff you will use and a lot of stuff you won’t. I didn’t use the harness. I used A Hotwire Harness. Not sure what they cost...
I would say Logan is pretty close on dollar amount minus drivetrain. Of course it depends on what parts you use. I went with an aftermarket k-member which made it a lot easier but a lot more expensive.
Sure.What info are you wanting to know?All of my drivetrain came out of a 2013 Challenger SRT.It does get quite expensive but if you can do all the work its really not hard if you have some fabrication skills.I used an HDK k-member which made things a lot easier.I also used a harness from...
I modified mine for the short run valve on back of the intake.I moved the wiper motor to the inside and used a neon motor.I made a recessed panel and welded it in.Others look a lot better but I didn’t want to butcher the firewall more than i had to.Modernmuscleextreme.com sells a block off plate...
Modern Muscle sells a block off plate for a 6.4 engine.Maybe they have one for a 5.7 or maybe they are the same.Worth a call.I found this after I modified my firewall
I have a Champion 22” with shroud and 16” Spal fan. Cools my stock 6.4 with air conditioner in 95 degree temps. I also run a fan controller from the Auto Cool Guy.
69 Dart GT finish panel DECAL only.I bought a couple of these about 10 years ago and found this one tucked away in my file cabinet.Has been stored between 2 pieces of cardboard in my house.I am not sure how this decal compares to an original but it looks very nice. $45 shipped U.S...