73Charger318's latest activity
-
Yep, those are just Mickey Mouse overload springs that fit over the shocks. They are just a band aid for a good set of springs. I had a... -
-
73Charger318 replied to the thread Rear shocks / struts.Will the trash can work as long as I mutter see you in hell? I already have KYB gas adjust purchased, but either one of your...
-
that there is some JC whitney bobo *** junk. take all that crap off, drive to the nearest lake, walk down to the water and throw that...
-
73Charger318 replied to the thread Rear shocks / struts.I see two options on RockAuto for leaf springs, both very similar in price. Maybe I'll just go with the new shocks without the coil...
-
lol I would just put the KYB shocks you got on, and save my pennies for some new leaf springs. They will make a large difference. You...
-
73Charger318 replied to the thread Rear shocks / struts."Are you planning on towing or putting 200 plus pounds of crap in the trunk?" NEITHER! If I had a dead body to move it would be...
-
73Charger318 replied to the thread Rear shocks / struts.I actually used zip ties to compress the front ones. Upper shock mounts look good, and already have the panel out of the way to access...
-
While the shocks are still attached to the bolts, loosen the bottom clamp first and that'll start you off.
-
73Charger318 replied to the thread Rear shocks / struts.I would be fully onboard with replacing the springs with the shocks. Can you lead me in the right direction in finding the replacement...
-
If the rear end were suspended and not on jack stands then yes the "helper" springs would be in "tension" But since the axle is fully...
-
73Charger318 replied to the thread Rear shocks / struts.Thanks. I wanted to make sure that's all I had to do. Didn't know if they were under any tension and if I needed any special tools to...
-
Hello. So I knew I had the tow package but discovered this also gave me the 3.23 gears instead of the typical 2.93. Another pretty...
-
-
73Charger318 replied to the thread Distributor Novice.I sanded the points and put them back in. Have heard nothing good about the Chinese replacements I ordered. If it's not original to the...
-
No real way to tell what it is even with a tag. You really have to take it apart and see what the internal part numbers are. Good news...
