7e5hangten360's latest activity
-
7e5hangten360 reacted to pittsburghracer's post in the thread Some dyno testing you guys may want to follow on YouTube with .I should have edited this earlier but this is not a test I’m doing or know anything about. I quickly did a copy and paste and had a... -
7e5hangten360 replied to the thread Cylinder head discussion 340 with stock above deck pistons.hi. i am going to try to give you the answers to the questions YOU asked. first things first , your actual compression ratio right now...
-
7e5hangten360 reacted to nfhDODGEnfh's post in the thread Cylinder head discussion 340 with stock above deck pistons with .I have a 340 block with approximately 10.25:1 compression bored .040 over, j heads with 72 cc chambers, comp cam xe268h, air gap intake...
-
7e5hangten360 replied to the thread HIGH FLOWING PORTED J HEADS.i know the pros will argue, but if you get 500 horses out of a set of HOME-ported j heads, call it good. if your goal is over that much...
-
7e5hangten360 replied to the thread How close is good enough regarding installed height.comp sells +.050 and -.050 locks. they have it for 3/8 and 11/32 stems. for 10 degree retainers. inexpensive. this may be your best bet.
-
I like the 340 cam over the Hughes because of the slow, lazy ramps. It'll last forever and be easy on the valve train. With the 114 LSA...
-
7e5hangten360 reacted to 69GT's post in the thread [FOR SALE] New Autometer Sport Comp II tachometer and gauges with .For sale: Autometer Sport Comp II tachometer and gauges. Included are a 3690 tachometer with shift light and 3692 volt, 3637 water temp...
-
good used lifters for 273, 318, 340 and 360 for use with solid flat-tappet cams. i believe they came from a 273, unsure. very...
-
-
I just say… I don’t port heads, I had Brett Miller port them. You wanna make fun of the head and make disparaging remarks, talk to Brett...
-
7e5hangten360 replied to the thread [SOLD] valvetrain for edelbrock heads sbm.115us$ shipped . i just dont need these parts. make an offer if interested.
