billyboyd

Profile posts Latest activity Postings Post Areas About

  • Hello billyboyd. my dart has a 72 318 with 9.1 comp with forged pistons and crank and stock rods. It has a comp magnum cam 501 lift 110 la with stock adjustable rockers and a gear drive. the heads are 302 casting with the big valve conversion. also running a edlebrock 318 street master intake with small runners(same as the heads with gasket porting)I did use large runner intakes and air gaps and they did not work as good as the little streetmaster as forced induction created better port velocity. I run this engine to 6500 rpm at 10 psi boost. no problems except I spit out the head gaskets once. (studded and with cosmic gaskets). The turbo is a garrett t-4 68ar 76 mm. Trans is a 904 with a 2500 rpm stall converter and 4:10 gears on 31 " tall tires. The carb I run on the street is a Holley 670 street avenger and off the street a 750 cfm double pumper. Hope this helps
    im going to post picks up on sunday. Ive been really busy but i will get them on there tomorrow
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Back
Top