Recent content by Black Girl

Thanks for response. This RV cam makes power off idle and it is done at 4800 w/355 gears I'm in second gear in what seems like a blink of an eye. Before the fbo plate I was at 15 initial and 38 total the total on the plugs looked good but the idle was dirty, so 20 was where the vacuum stopped...

I was trying to bring it all in close to the converter stall. Is that not correct?

Gentleman. My 360 smog block, alum head, 204/214 cam, stock converter, 69 dart likes 20 initial and 38 total. I'm using today an fbo plate at the 18 slot and changing the heavy spring for the light one in the kit. I have slight detonation at hard throttle. Should I switch to the 16 slot or jump...

Hey guys. This is what I found under the cam gear. 4 bolts, no dripper. Is this acceptable ? If not where can I get what I need? Thanks guys

Hey neighbor, I had basically the same set up you have there in the same car. I bought a Cold Case Rad and repop factory plastic shroud. So far so good even in town.

IMO, You can't buy or rent residential real estate right now. Just sell......it's a *****

Wolfman! 66 Big time radio WNBC NY! .....Who knows that?

James, the noise is coming from the upper bushings that are assembled with both shells right out of the bag. How do you grease them, take them apart? Pretty sure it would take a hammer, bushing driver and vise.

The upper bushings are assembled, can't lube. The frame is tied. I can't get enough adjustment with the front lowered, it wants the torsion bars back up. Do the bushings in the QA1 ucas squeak? Sorry I'm not great with the computer

Good morning all, rebuilt the front end on my 69 Dart vert with pst poly kit, lca stiffing kit, 103 bars adj strut rods lowered the car an inch or so. It squeaks bad and won’t align. Question : should I try moog 7103 offset bushings or tubular arms? If so which ones? Wknd car 2k miles a year...

RIP Mr Norm. We all have the koolest cars in the world! Let's move forward in fun!

Its a stock 76 short block, I bore scoped it when I checked the pressures. (dish pistons) I didn't install the cam, po gave me the cam card when I bought the car. It does run out of steam about 4800-5000 but gets there quick.

Shoulda thought more, long week! 204/216 650avs , headers, 355gear

Joe, I have that cam in a 360 W/.039 Head gaskets, eddy heads ootb in a dart. Stock converter, short tire. .Rusty's right 165ish cyl pressure. Pulls right off idle. Hope this helps