Recent content by BlindSquirrel

I drive mine everyday. That's why I bought it. The downside is other drivers, and what they can do to your car. OUCH.

Crackedback, Would the pinion gear that I have now with a set of 3.91's mate up with the 3.21's, or do I need to change pinions to change gears? Thanks, BlindSquirrel

Crackedback, I appreciate the help and advice. Is the swap from 8.25 rear to 8.75 rear just a drop out and bolt back in, or do I need to have parts fabricated for the swap? I don't plan on running the car hard, so a 741 would probably suit my purposes just fine. Thanks again, BlindSquirrel

Thank you to all that replied. I have an 8.75 rear end with a 741 center section. If i were to install that rear end, I would want to replace the 741 with a 742 or 489. Would the rear end swap be a simple bolt on replacement, or is there more involved? Thanks again for any help.

Hello, Guys and Gals, I need some help identifying my rear end, and an extra set of gears that came with the car. As you can see from the photos, the rear end is not a Mopar 8 3/4. The rear currently resides in a '67 Barracuda. As for the gears, the numbering that I can make out stamped into...

Hello Guys and Gals, I'm hoping that someone can help me out. Last week someone made a left turn from the right lane right into the side of my car. I need a new passenger fender and door for a '67 Barracuda Fastback. I'm located near Philadelphia, PA. Can anyone help? Thanks, BlindSquirrel

Hello, Guys and Gals, I need some help identifying my engine so that I can purchase new spark plugs and tune up the car. According to the previous owner, the car has a 360 crate motor, but I cannot verify the displacement or year. Can you tell me where to look for identification as to year...

Everytime I hear crawdads, I think about the Beverly Hillbillies episode where Grannie and Jethro are smoking crawdads. http://http://www.youtube.com/watch?v=jZgDHCt0-sc By the way, is that a Mopar in the closing shot? Glad you enjoyed your crawdads. BlindSquirrel

OCDart, Have you tried the NRA? They have all sorts of experts on their staff - maybe they can help. BlindSquirrel

You can also get the instrument light sockets from RockAuto on-line. BlindSquirrel

Dibs on the passenger mirror. I'll PM you. BlindSquirrel

JoeDust, I have to claim ignorance. The Previous Owner could not tell me anything about the car other that the fact that it is a 360. I have been driving the car and working on it a little bit at a time, so I don't know anything about the carb or jetting. I would have to assume that you are...

Thanks to those who have responded. I tried checking for a vacuum leak, with no luck. I am including some photos of the carb set up - maybe someone can help me solve the immediate problem with the added information. Thanks for any help you can provide. BlindSquirrel

Hello, Guys and Gals, I apologize in advance for sounding like an idiot, and not purchasing a "Holley Tuning" book yet, but stuff happens. I have a 1967 Barracuda with a 360 and a Holley 750 that I have been driving on a daily basis. The fuel pump was just replaced, and now when the car...

Mullinax, I was thinking of using the AutoMeter Street Rod MCX gauges that you have used in your dash. I love the look of your dash - how hard was it to retrofit the gauges? Thanks, BlindSquirrel