ch1ll's latest activity
-
Cch1ll replied to the thread Clutch advice.I got an APE powerbrute(no longer in business)3800 lbs pressure plate and matching disk made also by Milwaukee Clutch. Its a workout on...
-
Cch1ll replied to the thread Clutch advice.Have one in my 95 z28( I know, yuck right?). Sucks on the street. Custom made by Milwaukee clutch, in/out, grabs hard and harder the...
-
Cch1ll replied to the thread Hurst Super Shifter parts..More than likely a hardened bolt, grade 5 or grade 8.
-
Cch1ll replied to the thread Hurst Super Shifter parts..I’d call shifter doc, maybe they can source parts, don’t expect it to be cheap.
-
Cch1ll replied to the thread Paint it, Clear it or Let It Rip?.Under the hood? Coating on the outside keeps intake from absorbing heat from under the hood and coating on the inside keep s the fuel...
-
Cch1ll replied to the thread Paint it, Clear it or Let It Rip?.Have it ceramic coated and while you are at it have the inside thermal barrier coated.
-
CCheck to see if your valve covers still fit with the new intake before you paint it. You may have to clearance one or the other.
-
Cch1ll replied to the thread Small Blocks.Back before Allen Johnson stopped racing prostock, he tested both heads on his genIII race Hemi. He found about 1.5 hp difference...
-
CI believe that some people under rate the ability of a small block.
-
Cch1ll replied to the thread Small Blocks.That is ridiculous, any difference would be made up in lifter preload. Anyway how much can a stock or stock production pushrod set vary...
-
CThick cylinder walls like in the ‘75 and earlier 360 blocks, filled in webbing like the T/A, X, and R blocks, blind bolt holes...
-
Cch1ll replied to the thread Small Blocks.Still what I said is true and stock class racers will run a matched set. It’s a lot of work to match a set, but it can be done and there...
-
Cch1ll replied to the thread Small Blocks.Ever drive a big block Dart or Barracuda? A 340 Dart will outrun a 383 Road Runner in the quarter mile.
-
CI would seperate the exhaust ports to be like on a SB Ford
-
Cch1ll replied to the thread Small Blocks.No it would not. You use a shorter, lighter piston with a shorter pin height. Rods would stay the same length. The stroke of a 360 is...