Damn fish's latest activity
-
List everything you know about the combo. I have mine in a note on the phone. I just copy and paste when asked. I have a “somewhat”... -
Use a light checking spring.
-
Gonna have to replace the trans and rear end at a minimum to handle the stroker.
-
Don't know strip Dominator come out way before the M1
-
Damn fish replied to the thread How much drag should there be rotating my rear wheel in neutral. My brakes are not dragging.I will pull the drive line tomorrow .yes it has oil and the setup has maybe 500 miles
-
Damn fish replied to the thread How much drag should there be rotating my rear wheel in neutral. My brakes are not dragging.Yes I do have sure grip and 3.23 Gears but the force to rotate seems like a lot two hands
-
Damn fish posted the thread How much drag should there be rotating my rear wheel in neutral. My brakes are not dragging in Mopar General Discussions.My brakes are not dragging and my 727 is in neutral
-
My old age "budget" builds is like finding a decent running project, does not knock or smoke to bad, the trans shifts......and all for...
-
Damn fish reacted to RustyRatRod's post in the thread The man wants MORE caster. How about this idea? with .The QA1 upper arms are much more affordable.
-
Damn fish reacted to Mojoe9955's post in the thread Best Gearing for 8 3/4 Behind 1970 Duster 318 with .I went on the maiden voyage in my 74 Duster project with a mild cammed 318/904. I put in an 8.75 with 3:55 Sure Grip amd the other day I...
-
Damn fish reacted to 496 polara's post in the thread Best Gearing for 8 3/4 Behind 1970 Duster 318 with .With that rear tire 3.55 would be my choice.
-
Damn fish replied to the thread Making power out of the 318.Correct
-
If not open to running the required gear and stall, I'll build around the gear and stall compromise you set. Main problem when building...
-
Zero deck some thin gaskets and heads milling, should be able to get cr needed? Depending on his idea of loppy cam.
