Can anybody tell me what the best motor mounts
to use in my dart my 475hp/436lb torque motor doesn't like
stock mounts found some on classic industrys page called
Mighty mounts that look like stock but not then I found morosos
Solid steel mounts thought those might be to extreme have frame...
I have the D.U.I ignition HEI I checked continuity of regulator between
connectors its fine have a new one at home will try .
Can you suggest a performance one thanks
I have an HEI ignition that calls for no ballast and was wondering what would cause to much voltage my gauge reads 15- 15.5 volts any help would be appreciated thanks
Davis unified ignition makes a HEI for Mopars compleat kit
That looks like stock ignition . They will build your ignition to spec of
Your car (cam size ect) for about 300$ works greatwww.performancedistributors.com/
Thanks for the help don't real think it is my
problem seeing no sign of rubbing or heat discoloration
So I'm thinking of polishing up the main shaft with some
little emery light lube should go in nice
Can anybody get me up to speed on how
to tell the difference between an auto crank
and a 4 speed crank . I have a 4speed A-833
In my 70 and I have always have had trouble gettin
trans to slide all the way in to bell housing usually
about3/4 -1in so I normally just put bolts in bellhousing...
Hey jdog talked to Jim at hays I'm sending my pressure plate and clutch disc back to them there going to adjust the pressure plate he's said that the pressure plate is not disengaugeing they will set it up for free . Call hays and talk to Jim in specialty clutches nice guy very helpful tell him...