DC Dart's latest activity

  • D
    DC Dart replied to the thread 340 motor mount orientation.
    Do you have a bent 318 mounting bracket on a 340?
  • D
    DC Dart replied to the thread Gen3 hemi tkx swap.
    I was wondering how that was going with the bell. SST or American power train does not make a stepped pilot? Doesn't take much to make...
  • D
    DC Dart replied to the thread Gen3 hemi tkx swap.
    The longer 833 input shaft uses the inner pilot hole of the early engine crank. Too long for gen 3 hemi. The Tremec with the Ford short...
  • D
    DC Dart replied to the thread Gen3 hemi tkx swap.
    That's a big difference. The Quick Time probably has a thicker engine plate where the aluminum bell has a thinner one also. A thicker...
  • D
    DC Dart replied to the thread QA1 instant rebate at Summit.
    Thanks for the notification. Was dragging my feet. Ordered upper a arms.
  • D
    DC Dart replied to the thread Help me decide on a floor jack.
    Bought a professional series Napa floor jack many years ago. Cringed as I dragged it through gravel over the years. Very heavy. Was...
  • D
    DC Dart reacted to SlantedDart's post in the thread Gen3 hemi tkx swap with
    Like
    .
    Trans crossmember is complete. Very beefy. Started to make a tunnel patch also.
  • D
    DC Dart replied to the thread Gen3 hemi tkx swap.
    I marked the area with a sharpie and made clearance with a hammer and dolly. I could have made it a little nicer. But no hole.
    • IMG_20230201_180431531.jpg
  • D
    DC Dart replied to the thread Gen3 hemi tkx swap.
    I like it. Clean. Nice to not worry about something going over the top. Advantage of no torsion bars. Is the final position a little...
  • D
    DC Dart replied to the thread Gen3 hemi tkx swap.
    When I mocked my TKX up I used measurements from the 833. The TKX is almost the same length. I measured from the floor to the centerline...
  • D
    DC Dart replied to the thread Gen3 hemi tkx swap.
    Should be smooth sailing now. Since the torsion bars are not being used. The floor mods for TKX will be easy. I am thinking about...
  • D
    DC Dart reacted to SlantedDart's post in the thread Gen3 hemi tkx swap with
    Like
    .
    got everything in place. Ready to dial it in. Had to put longer dowels in. Welded in a starter snout support also. Drilled and tapped...
  • D
    DC Dart replied to the thread 440/Schumacher/Borgeson.
    Good luck on your progress today.
  • D
    DC Dart reacted to 67Dart440GT's post in the thread My Dad's 67 Satellite- A bittersweet day with
    Like
    .
    I knew this day was coming for a long time now. My Dad was diagnosed with Parkinson’s disease a few years ago and it is now starting to...
  • D
    DC Dart replied to the thread Anyone know about International Scouts???.
    What about the newer scout? Power steering, Dana 44 axles, automatic option heavier spring pivot points and frame. They used the 727...
Show older items
Back
Top