Recent content by dustoff440

  1. dustoff440

    crossover tubes

    I need a reliable source for a bolt in source for the crossover tubes on my kelsey hayes front disc brakes, 70 Dart any help would be greatly appreciated
  2. dustoff440

    [WANTED] kelsey hayes brake parts wanted

    getting close on my Dart I need the bolt and nut that holds the brake pedal pushrod to the brake pedal arm and also need the brake push rod (kelsey hayes 4 piston set up) I seem to have misplaced this hardware
  3. dustoff440

    Rebuilding Kelsey Hayes Calipers

    I sure would appreciate your telling where I ca buy new crossover tubes
  4. dustoff440

    Post engine assembly free rotation verification

    my stock short block 360 magnum dialed in at 27 lbs
  5. dustoff440

    ralleye wheel question

    I have the 5x4 ralleyes (small bolt pattern) on my 70 Dart. They are only 5.5 inches across. Did they make 5x4 ralleyes that were 7 inches wide like the 5x4 1/2 ones?
  6. dustoff440

    Fastest Street Cars In Your Town, 'Back In The Day'

    in high school in 1973 there was a doctors kid who had a Ls6 chevelle 454/465 hp that bad body ruled our town for years a very close second was a six pack super bee both cars were 4 speeds
  7. dustoff440

    New A Body in our Mopar Family

    times two
  8. dustoff440

    Helicopter fell out of the sky in Seattle (news copter).

    I've got almost a 1000 hours in a Huey and have had several occasions where I almost had a wire strike. I did hit the top of a small tree once but no damage.
  9. dustoff440

    Stall Speed Recommendation

    contact some manufacturers they do this all day long
  10. dustoff440

    wilwood adjustable proportioning valve

    has anyone used one of these any input would be appreciated Wilwood 260-11179 Proportioning Valve : Amazon.com : Automotive
  11. dustoff440

    360/380hp crate motor

    I have read that the 292 duration 501/513 cam in them produces a rough idle and low vacuum at idle and willl hardly run power brakes, they also dynoed at 400 hp
  12. dustoff440

    How difficult is it to turn an engine by hand?

    my 360 with a stock bottom end , short block with plugs out took 25 lbs on the torque wrench to turn it, you can grab the balancer and turn it by hand
  13. dustoff440

    fattest cam in a 340?

    x2 get yourself a timing tape find top dead center and start from there
  14. dustoff440

    correct painting for 70 Dart grille???

    Beautiful cars guys, thanks a million!!
  15. dustoff440

    correct painting for 70 Dart grille???

    I would really appreciate if someone could post a pic of the correct paint scheme of a 70 Dart grill.
Back
Top