Recent content by faster4231

I am running two relays 30a a piece the fans only pull 12.5 amps a piece so combined is 24/25a I figured if I ran a 30a inline fuse from the battery for each relay I should be ok.

option two http://www.servimg.com/image_preview.php?i=146&u=14064092 Just not sure what size fuses, 30?

no i dont want to use a 60a fuse lol a 30 max. I am thinking I will spend the money to get the thermo switch, they arent that much I just hope that trying to wire them isnt this tough. Do most simply have a 12v hot and a ground? You dont have to do fancy relay with them as well do you?

Thanks guys, this helps alot and you have now prevented a hwy fire.

I am reading it , simple fact is that my car is not wired with a standard harness so it makes everything very different, if I was standard it would make it alot easier. So 67dart whats your thougts on that link. Using the toggle for simple ground and running hot to both posts on relay, does that...

I mean draw the hot from the starter large bolt to get my 12v due to my battery being in trunk. Now I tried to rob power from my dash lights to power the switch however that blew out my dash lights. So I am thinking of going double hot to relay and use the toggle for ground I just found this...

http://home.comcast.net/~dntsdad/lightwire.JPG This is what I was thinking

Sweet diagram lol. Does anyone have a lay out or can draw one, all I am trying to prevent is have an additional ACC source ran to the toggle, I dont have one in my set up available to be used all my other power sources are powering my elec fuel pump. Can I run two fused wires from starter, one...

I also want or hear I can jump the 30 to 86 pin and put the toggle on that line, problem is I am not sure if this will also burn up. Can you imagine crusin flip on fans next thing you know your crouch is burning up on the hwy noooo thank you

I have two Jegs manufact fans. 12.5 amps apeice so I got two 30 amp relays. I am trying to hook one fan up at the moment. So, I ran a 12v constant line to the relay grounded the relay. the ran another 12v source to the toggle back to the relay. I have a inline fuse from the 12 to...

I have jegs, dual electric fans, I am trying to run them completley manuel with a toggle switch on dash. I am having trouble with the relays and have had 2 electric fires so far!!. I want to go from battery to toggle back to relay , gound relay and have the out to the fans. Any idea's or even...

Yo pishta If I dont get it done myself I gotta call upon your mad scientist mind. You have helped me plenty so far!

Thanks guys, been raining here and getting off work late, my next step is the timing and check the rotor. I will report back with my findings. I plugged the brake vacuum and thought I was going to be driving that night but nope. Must be timing. This is my project car so all I have is time on...

Thanks guys, sorry about my fit on the jokes. Its all in fun. I will try another day with other options and update

hahaha no!