Recent content by HP2

Yes, I've been thinking about that, but should the pressure really be so high at the filter then? My friend who built the engine sadly passed away in November so I can't ask him. That's one of the reasons the project was put on hold.

OK, time for an update: I replaced the 318 with a 302 LS1 big block Poly engine and now I'm hauling Caterpillars through Ukraine. No. I was wrenching all that last night to have it running for that one day at the track. Weather was cold with showers. I made one pass on cold slippery asphalt...

We’ll see if it works

Wtf? Been shifting between different mounts but couldn’t find a perfect fit. Finally got it in there. Thought it was okay until now. Been working with big blocks and never experienced this. Now what? Tranny and engine together and everything else in place, only thing left for start is flexplate...

That's pretty impressive. Auto or manual? What cam and intake? At what rpm did it peak?

Thanks for your input! I know it would be better with a higher CR but I didn't want to mill the heads since I don't know if I will sell the 318 or putting it in something else with another cam. I will check the cylinder pressure when I get it running just for fun. My cam is installed at zero...

I had to make a choice yesterday and I used the B&M. I picked it because it's smaller and would give a higher stall speed.

I have two converters: 1. Hughes #24-35 2. The one in pictures. Does anyone know what it is?

I had a hassle last night to get the valve train in the ballpark. Couldn't find pushrods short enough so I had to shim the rocker shaft 1/64 to make it work. It's not optimal but it should work. We'll see!

I got the 318 short block already put together. It was seriously built buy a racer I know very well and I got it dirt cheap and was intended to go into my Warlock. If I would have to start from scratch I would probably do like you described but I have been very busy and want the car running for...

I was going to build a 377 of a 340 block I have, but couldn't find any this spring so I took what I have to get the car running so I can sort details out for next season. Plan is to build a mild and reliable mid to high 6's car for Swedish Street Week. The 377 will have a mech cam and tunnel...

Don't have a chance for dyno time this time of year. Will take it to the strip August 1st though :)

318 LA block 340 crank KB pistons zero decked 10.45:1 CR Edelbrock 6077 heads, untouched 273 adjustable rockers MP hyd 292/292 .508/.508 108 LS (I'm not quite sure about the cam but after some measuring and calculation it is my best guess) Weiand Stealth intake w/ 1" spacer Quick Fuel 750 dp...

PM me!

Looking for a high rise tunnel ram for my nostalgica 340 Duster build. PM please