Recent content by jcmeyer5

  1. jcmeyer5

    [WANTED] 1969 Dodge Dart Glove Box Striker/Catch

    I dont even know what it looks like. I have a picture off ebay, but who knows?
  2. jcmeyer5

    [WANTED] 1969 Dodge Dart Glove Box Striker/Catch

    Looking for the striker for the glove box and the screw plate that it screws to.
  3. jcmeyer5

    [Found!] 1969 Dart Driver door

    Just picked up a really nice one from Newport, MI. Thank you though!
  4. jcmeyer5

    [Found!] 1969 Dart Driver door

    I am looking more close to home right now. So far there seem to be some available, but no response from the sellers. My concern with either a Florida or California option is shipping.
  5. jcmeyer5

    [Found!] 1969 Dart Driver door

    just FYI, I dont care if it’s actually a 1969 so long as it will fit a 1969
  6. jcmeyer5

    [Found!] 1969 Dart Driver door

    I am in sudden need of a new driver door. I only need the door shell. I’d like it to be in good condition. I also need the lower hinge.
  7. jcmeyer5

    Dad’s 1969 Dodge Dart Swinger 340

    Working on the gauge cluster. 3 gauges were giving fits. Temp and Fuel gauges were not working at all. Speedometer was working, but getting stuck and wouldnt drop back to zero - or past 40MPH for that matter. Pulled the gauge cluster and tested the gauges individually. Fuel gauge works but...
  8. jcmeyer5

    Temp and fuel gauges no bueno

    Another note... oddly enough, the temp gauge from the ebay cluster had a different configuration than the original gauges in our car... its as if the assembly was upside down and flipped. The gauge I ended up being able to use though matches the configuration of the original temp gauge, so...
  9. jcmeyer5

    Temp and fuel gauges no bueno

    So I was able to score an entire gauge cluster off ebay. Two chances to get a single good gauge. Pulled the temp and fuel gauges. Looked at the temp gauge first... that thing is crispy, and the filament is broken. Pulled the fuel gauge apart and it looks nice and clean, and the filament is...
  10. jcmeyer5

    [Found!] 1969 Dart Temp or Fuel gauge

    Needs to be working.
  11. jcmeyer5

    Temp and fuel gauges no bueno

    @MoparMike1974 stock style aftermarket. Depending on the brand, it could be reading correctly. I’ll stick it back on the car and see how it behaves. Like I said, I was using an 18 ohm resistor. It shouldn’t have read full. pulled the temp gauge apart. I see the broken filament. Is there any...
  12. jcmeyer5

    Temp and fuel gauges no bueno

    Okay update. I took out the cluster to bench test. The pins were tight and getting good connection, but I soldered them for added peace of mind, I checked continuity on all 3 pins at play, and all is checking fine. I tested the fuel gauge, and it reads about 3/4 with a 18ohm resistor. The temp...
  13. jcmeyer5

    [Found!] Prestolite LO horn

    They are the ones with the detachable brackets.
  14. jcmeyer5

    [Found!] Prestolite LO horn

    Evidently these damn things take special 5/16 bolts because a regular 5/16 bolt got stuck. And I cant get it out. So it’s dead. I need another one.
  15. jcmeyer5

    Clutch pedal hitting… something

    Should it be hitting what I can only think is a flange for a brake stop bumper?
Back
Top