F arms dont fit anything but F, M and J bodies.
ditto on the bushings.
The upper ball joint is the same as the large A body.
The spindles do fit A bodies. I have a set on my Demon.
Yup...8.25 was large bolt pattern only and 73 model year and newer for A bodies.
The 7.25 was available in both bolt patterns 73-76, small bolt only 72 back.
8.25 was not available for the A bodies before 1973.
I'm going to go with cobbled to fit, final answer:D
I've not seen any A bodies with original factory isolators on the leafs.
I didnt think they were used on any A's, but I sure dont know everything.
The rubber piece you describe sounds like one half of the F,M,J isolator.
Not designed to be...
F,M,J and late B bodies were iso mount leafs, 1976 thru 88 anyways.
Big honkin pieces of steel wrapped around rubber pads with the leaf sandwiched inbetween and clamped to the axle.
7.25, and 8.25 rears.
L&R set of 10" x 2.25" A body loaded small bolt backing plate assemblies 67-72.
Complete as shown with all hardware incl. self adjusters
$25/side plus shipping
Should be $22 or under to U.S. addresses
paypal, money order both work
if you just want the hardware (no shoes or plates) shipping will...
pns 4140063 and 4140442 (same part, different number)
original factory MP viscous fan blade with steep pitch moves a lot of air
I have a couple of these in very good condition I wont be using so time to make some room!
$45 plus shipping
paypal, moneyorder both work
Thanks!:thumbsup:
Set of mounts for A body 318 and 273, 67-72.
Blasted clean and primed, very good shape, includes bolts.
$70 plus shipping (approx. $14 or less to U.S. addresses, others just ask)
paypal, moneyorder both work