Recent content by mopar_stroker

I used to run a gt45 like that on a BMW 6cyl a couple years ago.. Didn´t have any luck with that turbo, the bearings failed after just a couple houres. Got a holset HX55 mounted instead. But maybe I got a bad Gt45 in the firstplase? And maybe the "china" turbos have got better?

I have just bought a keith black waterblock. And I´m now thinking of building a twin turbo bigblock. I already got a set of 440-1 heads with jesel rockers, new manley nextek tripple springs, new 2,25" titan intakevalves, new 1.81" inconel exhaustvalves. Also have a 4.25" 4340 crank and a set of...

Bought a KeithBlack block today instead..

a friend runs a 400 based 505 with B1 heads. it has 863hp, and it has been running without problems the past two seasons. but i suppose the rb block is much weaker.. ](*,)

I have built a -73 440" based 505" stroker. Half filled with hardblock, BCR alu maincaps and a BCR girdle. Bore is 4.350". Magnafluxed, sonic checked. Flattop KB pistons, eagle H-beam rods 7.100 and a 4,25 440 source crank. Indy 440-1 heads, jesel shaftmounted rockers 1,7. Will run it on E85...

Thanks.

I know that an aftermarket block would be the best. But will a 318 block handle 700hp??

How much horsepower can a smallblock mopar handle? when do the block collapse, crack? rods? pistons? are the 318 and 340 the same block? I have no experience of the smallblock. Now I´m running a BB505 in my dart -68, but it would be fun to build a turbo smallblock..

I balanced my 512 strokerkit before I installed it.

Im running the Magnafuel prostar 500.

I have already moved the springs, they are on the inside of the framerails.. And I will get ladderbars, but not this season.

Im building my first bigblock and the parts Im using are as follows: -73 440 block 440source 4,25" crank Eagle H-beam rods 7,100" KB flattop pistons with totalseal rings Clevite H-series bearings Milodon external pickup oilpump 440source windagetray BCR alu-maincaps and girdle...

:cheers:

Thanks

Where do a find a abs sensor to a chrysler neon -97?? it´s to the right rear wheel. Need a new one. It´s difficult to find one here in sweden. And when I did find one, the guy wanted 320dollars!! So where could I buy one?? to a much better price?