Recent content by MR4V

I’ve had a few inquiries on this set up. To help with quotes on shipping here’s the link for UPS Shipping | UPS My post code in Australia is 4504 and the weight and measurements are 61lbs 25” long 17 1/2” wide 14” long I’m happy to entertain a reasonable offer on this set up

Hi yellow rose Only selling as a complete package as carbs and filters want suit anything else I have. Cheers Karl

Hi All For sale is a complete Edelbrock STR 12 manifold set up, has twin 450 Holley,s with rear metering blocks for easier tuning, Billet linkages set up at 1-1, K&N Extreme filters, -6 fuel lines, 3 new laser cut top plate gaskets, Felpro intake gasket and original steel lines if needed. No...

Thanks for everyone's help. Problem fixed, it turned out to be a faulty fitting that was not sealing on the suction side, so under WOT it was sucking air. Now have a constant 6psi.

Thanks all. Yes this system has no return line and is vented via the fuel cap. I've removed the cap and still have the same issue. I to believe it's the suction side, the flexible line is new, E85 compatible and as too all the other lines. I have checked to see if any line has delaminated and...

Hi All Need some help with fluctuating fuel pressure. This is a all new dead head system and is in a Duster with new sender with 1/2 inch pick up, 1/2 to Holley 12-125gph pump, 1/2 to Holley 12-845 Billet reg and 1/2 to E85 Quick Fuel Q850. Have great pressure from idle to about 3500rpm (6psi)...

Thanks all. I didn't miss the 440 on it just couldn't find any information on it on the web other than it's a POS manifold or if it was for an RB or B.

Hi All I'm a small block guy and got this intake in amongst some parts I bought. I know it's not a performance one I just want to know if it fits a RB or B motor? http://s131.photobucket.com/user/MR4V/media/IMG_0198_zpsa9ov2k2u.jpg.html][/URL]...

Ok to assist anyone looking for information on Super Commando's I've added the link to the thread that I started wanting information on them. MP Super Commando Heads As I'm in Australia W2s are rare to see or get. If I order a set from the US the cost is over the top. A complete top end would...

Yes I can only find them on the Hughes site, all other sites are listing them as discontinued. Hughes Engines

Exchange rate is easy to work out. Anything I've purchased of FABO I've used PayPal and paid the fees.

Thanks Rumblefish360. $775 for rockers, glad I got the heads cheap.

Thanks Johnny Pace, that was one of the treads I read in my search. Bit hard to call as I'm in Australia. Getting good LA heads here is not easy, I've been looking for 2 years for a set of W2's with no luck. These came up and the price was more than right......the rockers seam to be the...