I thought someone may be able to use the idea or modify it for their own use. My oil pan hangs down below the k frame and I wanted some protection. In the photos I used square tubing and plate and welded grade 8 bolts inline with the 2 holes from the factory on the k frame. This allow the k...
I know the full history of the bike. It bought from a guy in SAN Bernardino who brought it over himself from Europe and owned it for 16 years. It was ridden regularly at GlenHelen. Mechanically the bike is mint, I purchased new plastics from Gary. I just need to frame it to clean it up. It just...
It runs into the back of the NPT fitting. The sump has a one way valve the allows it to fill and then discharge later when either you activate the switch or if left on, when the oil pressure drops.
I thought I would share a few pics for future reference for other members. I used Riv nuts in the inner fender well to mount the band clamps and Aeroquip fittings. It’s a 2 quart system. Note; I have a Victor intake on and I have the rear of the hood kicked up about half an inch. Andrew