plymouth4onthefloor's latest activity
-
plymouth4onthefloor reacted to furrystump's post in the thread Appreciate some input on spark plug reading with .Fuel pressure does not mean fuel in the bowl. Don’t think fuel is your problem though. An issue I ran into is the rotor being too high... -
plymouth4onthefloor replied to the thread Z Paint code.My Satellite was painted in Switzerland, the Coronet in the USA, they did match like twins! My car was ZZ1 single stage metallic, so...
-
-
plymouth4onthefloor replied to the thread Z Paint code.This is a Standox based formula. attention this is in Liter (1000cc)
-
-
plymouth4onthefloor replied to the thread How to achieve this stance please?.i would lower (for free) the blue in the front, 1/2 to 1 inch. or a higher tire in the back.
-
plymouth4onthefloor replied to the thread Underbody paint advice needed.by the way, remove the axle, that thing will piss you off during painting
-
plymouth4onthefloor replied to the thread Underbody paint advice needed.
-
plymouth4onthefloor replied to the thread Ebay water pump explodes..adjusting the timing with that pump will be more fun than russian roulet.... I can't understand why people always buy the cheapest...
-
Going from 108 to 110 might lose you 5-10+ lbs-ft, it all steps in performance the further you stray the further the change in tq and...
-
plymouth4onthefloor replied to the thread NGK plugs..NGK has a Productfinder application on their website. NGK has a excellent freeburn. No need for hot plugs.
-
plymouth4onthefloor reacted to vntned's post in the thread Cylinder head discussion 340 with stock above deck pistons with .I’d pull the spray and work on tuning or driving, that combo should run mid to low 13s without the bottle and mid 12s with the 100shot.
-
plymouth4onthefloor reacted to RustyRatRod's post in the thread Oil line plug/ low oil pressure on cold starts with .Trust me. The plugs are in place. You'd dang well know if they weren't. Can you describe the pan to pickup position? The pickup is...
-
plymouth4onthefloor replied to the thread Does this prove David Vizard's 128 lsa formula ?.He takes exhaust valve size for calculating primary header tube. DV never said a narrow LSA is better! You have to choose the right LSA...
-
plymouth4onthefloor replied to the thread Does this prove David Vizard's 128 lsa formula ?.yes sir.
-
plymouth4onthefloor reacted to 273's post in the thread Does this prove David Vizard's 128 lsa formula ? with .Nope
-
plymouth4onthefloor reacted to pittsburghracer's post in the thread Small block TrickFlow heads part 1 with .Ok as exciting as I was about my one TrickFlow head showing up around 1:00 I didn’t head to the shop till 5:00. It was hard for me to...
