Recent content by plymouth73

Thank you for the pic that's how I thought it should look the studs on the back of my emblem do not match the holes in my trunk lid so I will cut them off and use the double sided emblem tape as mentioned by Sedanman.

T hank you that is what I will be doing then.

These are the holes I have to deal with. I have 2 scamp emblems I might just cut the studs off and glue over the holes

Does anybody know what emblem goes on the trunk lid of a 1973 Plymouth scamp? I have two holes in my trunk lid and want to find the emblem to cover the holes.

Do you know how much space I should have between the bump stop?

If you mean totally different cars because one has 2 doors and the other has 4 doors then you are correct. otherwise they are the same car.

the problem was the mechanic changed the wrong seal lol but now both seals are new and everything is fine. I figured this out because I bought my own seal and took it to the shop with the car I showed the mechanic the seal and told him he might of used a cheap seal or you did it wrong so I want...

Thank you, I cut the front facing completely out then covered the whole dash with fiberglass then cut the holes for the gauges,stereo and heater controls where I wanted them.

can you tell me how you hooked it up? I am basically starting from scratch. Do I need to get a purge valve and a vapor/liquid separator?

Do you have an after market four barrel? Im not sure how to hook it up to my carb.

sorry didnt see that you posted the part number I looked at it, I might just buy that also

How many connection are on it? this canister I have has an a/c barb but I am thinking I can just cap it.

Hello Mopar Fans, I have a 1973 plymouth scamp 318 with street demon carb. When I bought the car it had no vapor canister, so I used the vent line for a fuel return coming off of my 3 nipple fuel filter to a new fuel sending unit that has a return line, so I capped the original vent tube on the...