Recent content by Romulo Roderiques

I measured the pushrod length and it looks like it’s 7 1/8”

Which hydraulic system are you referring to?

Need some help here I am converting my 65 Dart 273 to hydraulic cam and lifters and can’t find the right length pushrods. I did not get hydraulic rocker arms and kept the mechanical adjustable ones. Do I need to get hydraulic rocker arms as well and will the OE rocker shafts fit ?

Question. Since this used to be a two barrel carb engine but now it is has a four barrel intake and carb, should I be looking for specs on a cam set up for a four barrel or still a two barrel ?

Just trying to get some help

Not followin you

Not at all. I was going to call them next week. Do they just grind down the old one or what?

I’m keeping everything stock none of the pushrods are bent. Thanks for the info.

I have a stock 65 Dart with a 273 with a four barrel Edelbrock and Performer intake manifold. Stock transmission. It was originally a two barrel engine. I am looking to order a Howard’s cam and lifter set. I do not have a factory service manual and was wondering if anyone could chime in with...

What year and engine size do you have. I don’t know even know what exactly I should order from Howard’s

I purchased a solid cam and lifter kit from Summit for my 65 Dart back in December. It’s on a huge back order. Anyone know any other good sources that may have one available? TIA

Update high leak down. Needs new heads…

And I can use stock lifters with this type of cam?

Would they mount up to the Trans? I know the 318 would but what about the 360?