Recent content by sb3854

Tried that but only lifted the car.

Any advise on adjustment of the front door on a '67 Valiant 2dr sedan. I thought it was the pins but they are solid but the door is off about 1/4 inch. Help please.

Do you have plans for the manual box?

Anyone disconnect the hood springs on a '67 Valiant. Thanks.

'67 Valiant hood and drive train (/6, 904, 7-1/4). I am in Tucson,Az.

I hope someone can help me find the hazard light flasher on my 67 Valiant. I can hear the turn signal flasher working but the hazard lights don't work. I've looked in the normal places (fuse block-steering column ) but no luck. The turn signal sounds like it's in the middle of the dash around...

How hard was it to stuff the Gen 1 hemi in there. I have a 67 Val. with a RB in it now but also have a 392 that needs a home. Looks really good.

I used his forward down bars with my fender exit headers. I had to trim them for a little extra clearance but the material was there so no problem. The guy is really good to work with. I will use his stuff in the future without worries.

Thanks

Does anyone know what the outside to outside measurement of the bushings on a 67 a body upper control should be?

Dual snorkle. Prefer orange but will use a black one.

Dual snorkle. Prefer orange but black will do.

I'm interested in the block. Steve

Looking for a good BB 727 trans. and 8-3/4 a body rearend. Limited slip a must and prefer 373 or lower gears Thanks

Isn't there 2 sides to the ignition. A run and a start. It sounds like a problem with the run side. I wound check the wire from the run side of the ignition.