I was told because my floor pans are pretty rusty that I would have to remove the rust to see if the metal underneath is any good this picture is one that I took after hand brushing with a wire brush do I need to remove further rust in the center of the picture or is that enough. Yes I know the...
Looking for a drivers front frame section for my 1968 Plymouth Valiant 100 and I was told that anything in this year span would fit I am located in North Carolina and would be willing to pick it up if shipping doesn't work for you.
I'm converting my 68 from drum to disc and the manufacturer recommends 15in wheels what size tires would you recommend to still have clearances thanks in advance!
so I went back over with the diagram and re-gapped the sparkplugs to make sure that they were correct and re did the wiring I recorded me turning it over to see if you guys might be able to tell what is going on by hearing it.
Okay so I'm back to working on the Plymouth and I've got spark and gas but the engine still isn't starting I'm starting to think the firing order on my sparkplug wires where can I find a diagram of that. I know this engine is a runner we drove it to where it is now and it wasn't misfiring or...
What kind of motor oil do you use in your engine mine is the 225 my local parts stores want me to use 0w-20 but people in other articles seem to say to use 10w-30
so I have stripped the interior to get a better look at the holes in the floor and while waiting for parts I was going to change the oil and filter so I went to O'rileys and they recommended 0w-20 but when I checked the forum people have recommended 10w-30 should I stick with what the part store...