Recent content by tarrin8

doug got the flywheel for me and he said if we dont need it then it can be returned , i thought he was getting one for an external balanced motor but i guess they didnt have it , now the flywheel that was in there has holes drilled in it but on the opposite side of were they should be

cast cranks were only used for a year and a half so there isnt many of them but there are 4 speeds with the cast crank all 73 340 4 speeds were cast, i have found posts were people have a 73 340 4 spd and its all numbers matching and they have cast cranks. but all i need is confirmation that...

someones got to know ? i would just drill the hole but if its wrong i dont want my new flywheel to be ruined , money is starting to get tight and i just wanna drive!

will doing this to an neutral balanced flywheel work for a cast crank 340? has anyone done this? http://t0.gstatic.com/images?q=tbn:ANd9GcRzeHa3s5w9BlkV-p_V4aTED4aS59YRssJ2ggfs92iPM8KTYn5cVF8vLhkL3Q

i ordered this from summit for $25 http://www.summitracing.com/parts/MRG-5657/ , i just cut it to size and works great on my dart

http://i363.photobucket.com/albums/oo78/shelbydoggs/Flywheel-mods/fly-340-cast.jpg has anyone tried this ? i think im gonna give this a try , drill the hole and if it works then great and if not well i still have the vibration

forged steel was used until 72 sometime in 72 they started using cast cranks , now i have taken the pan off and have confirmed that it is a cast crank, i can get the right flywheel for it from napa but it will take 3-4 weeks to get one in so i was hoping i can find one that i can get quicker

Wanted flywheel for cast crank 340

im pretty sure it was sprayed but im not 100% sure under the rockers is painted , even the springs were painted

ya forsure im gonna remove anything that i can get off , but how damaging is it for the paint that already is off i can see that a good amount of paint is already gone

i took off my valve covers today and noticed that the paint on the heads are flaking, just by rubbing my fingers over it some paint comes off , so my main question is how damaging will this be to the motor and should i try and remove all the loose paint, why would someone paint the heads anyways...

working as a laborer for Quantum Murray for the next 2 years we will be cleaning out alcan (a aluminium smelter) and tearing it down then hopefully i will get on with another contractor for the rebuild so for the next 5-10 year i will be a laborer after that who knows..

thanks for the help

it is a edelbrock carb with 1405 1977 stamped on the front and 8867 stamped on top , i tried to google it and couldnt find what cfm it is...